Conductive Hook Loop Two Sides For Nuclear Power Plant

Application: 

Applicable to electromagnetic radiation safety protection products, to prevent the electronic information leakage of protective equipment, and the anti static, conductive industry requirements, such as aviation, marine, medical, chemical, electronic information, substation, communication station, radar station, nuclear power plant and toy, shielding electromagnetic wave military tent, radio frequency shielding, etc.

For more details, please contact to Shenzhen Zhihong textile.

Features and applications:

The hook and the loop are made from the United States DuPont nylon as the base,using one of the world's most advanced nano silver layer curing technology unrecoginized the silver and wrap the base material into permanent silver fiber,Then woven into the world's top anti electromagnetic radiation . It has super strong anti electromagnetic radiation, electrical conductivity, anti-static, antibacterial deodorant performance. It is composed of two sides : the hook tape and the loop tape, Electromagnetic shielding effectiveness is equal to or greater than 60dB, The resistance：1 Ohm(Ω), after 20 cycles of washing, electromagnetic shielding effectiveness of the drop is less than 5%,resists to high temperature 140 degrees celsius, endurable material and high cycle life. This high quality hook and loop tapes can be cycled in excess of 10000 times. Due to the full silvering the surface is consistently conductive with a good resistance even over the gap! Ideally, the fasteners are sewed up with our silvered sewing yarns.

Specifications:

Width: 16mm, 20mm, 25mm, 50mm,Length: 25 meter/roll 27.5 yard/roll. If you need special specifications, we can customize our producing for you.