Fluorescent Inkjet Transfer Paper, Heat Transfer Ppaer, A4

Fluorescent Inkjet Transfer Paper

1. Introduction

Fluorescent Inkjet Transfer Paper is our newly developed digital printing transfer paper with fluorescence effect. Patterns transferred with this paper shows colorful personalized image in the daytime, while in the evening (or in dark) they present brightly yellow-green light, realizing a magic fluorescence effect. Any image and textiles of any color can be transferred with this effect. Thus they are particularly suitable for dark occasions like bars, cinemas, concerts, disco and fans’ paties.

This paper simply uses desktop inkjet printers and easily operated. Just print the designed image on the paper, and then transfer it onto textiles. In addition, there is no special requirement to the printer’s ink. Common dye ink, heat transfer ink, pigment ink are all right, like Hongcai, Lingsegui, Baiduxi, etc.

2. Specification

A4 297mm×210mm   

3. Operation Instructions

◆ Printing

-Printer setup. Any colored inkjet printer is suitable. In printer setup, recommend to select “Photo Quality Inkjet Paper” mode for satisfactory printing results.

◆ Cutting

-After drying, cut out the image.

◆ Transferring

               -Preheat the heat press machine to 150℃~165℃.

  -Peel the transfer film from the base paper.

-Place the coating onto the textile with the printed (image) side facing upwards.

-Put a sheet of isolation paper onto the image, with the glossy side of the isolation paper facing towards the image.

-Transfer for 20-30 seconds and then remove the textile, peel the isolation paper after cooled.

◆ Washing

-It’s best not to wash the textile in 24 hours after transferring.

-Washing the textile in cold or warm water under 40℃. Do not wash with strongly alkaline detergents or bleach. Avoid rubbing the transfer pattern when hand washing. Do not wring. Line dry in shade recommended.

-Do not dry-clean.