Plastic Electrical Conduit Bushing Conduit Cap

Product description: 

Conduit bushing is used to protect cable from abrasion by electrical-metallic tubing.

Made from linear low density polyethylene, design with extra internal sleeve covers the entire inside diameter.

Good toughness and strong rigidity. Heat - resistance. Cold - resistance. Resistance to acid and alkali. Stress cracking resistance.

By the way, you can also customize the products as you want.

e-mail:Tszkyh@163.com

telephone number：+8613933353855

                    +860315-3851158

Material used: 

Linear low density polyethylene (LLDPE)

Characteristics of the insulating tube cap The product has the advantages of beautiful appearance, high strength, good flexibility, rigidity, heat resistance and cold resistance. Has good resistance to environmental stress cracking, tear strength and other properties. It is resistant to acids, alkalis, organic solvents, etc.

The purpose of the insulated pipe cap:

 In the wiring of the power engineering cable, in order to prevent the cable from being scratched and worn by the edge of the threading pipe, the insulating pipe cap is used, and the card is sheathed at both ends of the cable threading pipe to protect the cable in the threading pipe. Keep the cable in a safe and insulated state for a long time, avoiding electric accidents and personal injury.

Size: (inch)

 DN15（1/2IN）、DN20（3/4IN）、DN25（1IN）、DN32（1.25IN）、

DN40（1.5IN）、DN50（2IN）、  DN65（2.5IN）、DN80（3IN）、   

DN100（4IN） ，DN125（5IN） DN150（6IN）

OR Φ20、Φ25、Φ32、Φ40、Φ50