10m Self Propelled Mobile Moveable Hydraulic Scissor Boom Lift for UAE

Product Application

SevenLift 10m Self Propelled Mobile Moveable Hydraulic Scissor Boom Lift for UAE lift is widely used for the equipment installations and maintenance at the following places like construction sites workshops,warehouse,granary, bus/railway stations,hotels,airports,gas station and aerial pipeline. It is mainly used to lift workers to higher places for maintenance,cleaning or installation, normally from 4m to 12m high.

Main Features

5. Horizontal extension of deck(customized) .

battary self-propelled scissor lift table

Extension deck and Foldable guardrails.
Control device both on the platform and the bottom of the lift.

Descend alarm and Tilt level sensor with audible alarm.

4 rubber wheels, 2-wheel hydraulic motor drive, 2-wheel steering.

Swing-out component trays and Trojan Batteries

Swing-out tray on the two sides

The trays in both sides of the chassis can be swing out, which facilitate the maintenance, inspection and replacement.

Trojan Batteries

The lift takes storage battery(imported from American) as the power source, and makes low noise and no emission when it working.

Traceless rubber tyres

2-wheel hydraulic motor drive and 2-wheel steering.The steering wheel can make a 90°turn in situ, can runin both high and low speeds, and can be used in small place.

Max grade ability 25%

The auto scissor platforms offer up to 25% grade ability when driving on slopes with safety protection.

Questions about SevenLift 10m Self Propelled Mobile Moveable Hydraulic Scissor Boom Lift for UAE

Q1. Can I have a sample model?
A:Our self-propelled hydraulic electric scissor lift is customized based on your detail request, you can buy one for your testing at first.
MOQ 1 set is available.

Q2. What about the delivery time?
A: It usually takes about 10 working days after we receive the deposit.

Q3. What kind of payment do you support?
A: T/T, L/C, West Union, Alibaba Trade Assurance. T/T is usually.

Q4. How to proceed an order for the lift?
A: Firstly, tell us your requirements, if you can send a photo where you will use the lift, it will be better.
Secondly, we send you our suggestions and quote according to the practical situation.
Thirdly, you confirm the quotation along with your request details and places deposit.
Then we arrange the production. Once we finish the production, we will send photos for your reference.

Q5. How to transfer the lift machine?
A: It is usually shipped by sea. Plywood package and LCL in a 20' container.
The ship has to be booked one-week before, and shipping time is usually longer, please be patient.

Q6. Is it OK to print my LOGO on the lift?
A:Yes. Please inform us formally before our production and send us your high pixel LOGO.

Q7: How to deal with the broken?
A: Firstly, our products are produced in strict quality, we must test it before we sending out each machine.
Secondly, we will buy an Insurance for any CIF product to make sure the lift safety in shipping.
If any parts broken, you can tell us, we have one year warranty and free send you a new spare parts and we supply technical supporting all the times.