Chinese new type aluminum door window automatic 4 corners crimping machine

aluminum 4 side corner crimping machine for windows doors

Model:LJJZ4-CNC-S1800X3000

Features:

♦ Fuselage of entire machine design scientific, reasonable and steadily. And it welds with square steel pipe with the thickness of 10mm and make products steady when combining the corner.

♦ Adopt the plunger type large-scale hydraulic pressure station, the pressure stable, offered the pressure well and the noise is low.

♦ The electrically controlled box independent laying independently. It is convenient, even more is advantageous for the crimping angle quality real-time monitoring. The transmission connection uses the aerospace special-purpose receptacle, safe and stable.

♦ Adopt original installation import flat square guide rail, which can guarantee the precision of the heads when moves horizontally. Transmission adopts the original imported installation ball bearing master screw.

♦ The precision is extremely high so it can guarantee group angle quality.

♦ The servo controlling machines, servo motor, person-machine touching the contact surface are adopt the original imported installation of Japanese Mitsubishi system, and the increase assistance brake system. It is stable and efficiency.

♦ The processing smallest scope is may reach 510x510mm, the manual mediation can realized to 500x500mm, it can suitable for all kinds of windows and doors that enterprise’s processing to need.

♦ Used for corner punching and riveting combination of aluminum window and door four corner connecting at one time is available which greatly increased the production efficiency.

♦ Clamping device can adjust forward and back, it is easy to operate.

♦ Adopt CNC system can realize automatic and accurate locating thus can produce high accuracy windows.

♦ Wide profile processing range due to convenient corner combining cylinder setting.

♦ Suitable for various kinds high quality and high volume windows production.

♦ Can adjust the crimping position on the working table;

♦ The inner positioning is changed to the adjustable lift type;

♦ The above clamping device is equipped with second-displacement device;

♦ The height and thickness of outside positioning device can be adjusted;

♦ Add once again feeding adjustable pressure device;

♦ The clamping cylinder can move backward so it's convenient to place the profiles;

♦ It's convenient to change cutters with counters equipped.

♦ Parker patent, unique design.

Parameter:

Contact Us

Haijinna CNC Machinery Co., Ltd.

• *Email
  Please enter Your valid email address.
• *To

  

  Haijinna CNC Machinery Co., Ltd.
• *Message
  Your inquiry content must be between 20 to 5000 characters.
•  

  Please enter a correct verification code.

Send Now