Hot melt Extruder For Dual Glass (RDJ-B)

Hot melt Extruder For Dual Glass     (RDJ-B)  

Hot melt glue extruder machine for double glass/insulating glass/hollow glass production

Machine type:

1. Single-component Hot Melt Machine for insulating glass

2. hot melt glue machine

3. hot melt gluing machine

4. glass processing machine

1.Product Description

1).Brief introduction

RDJ-B HOT MELT MACHINE is designed for the hot melt of insulating glass with aluminum spacer. It is of the second generation of equipment with the same model. It is small and light, easy to operate and repair and has stable control over temperature. Operation can be carried out after preheating of half an hour. (there is sealant table can help to make it)

2).Installation and Trial Run

No special conditions are required except that the operation site is kept clean.

Make sure the power be connected correctly in accordance with the requirements.

Put the designated rubber block in the rubber box, set the temperature (reference degree being 150°C-170°C) and preheat it for about 30 minutes.

When the set temperatures of the rubber and rubber pipe have been satisfied, triggering the rubber gun can extrude the hot melt.

3).Kindly note:

Before you buy the machine, please make sure then tell me your local power supply,then we can make the right according to your true voltage.

Kindly and friendly inform:

we have skilled engineers with well English ability in this field about 20 years, they can directly to give you any help on machines by calling or by video link or by email in short time, and before our machine reach your workshop, if you need we help you to design a drawing that tell you all machines should how to place in your workshop,for example, which machine should put which proper place is better, etc..., we can help you to give you a drawing to give you suggestion in short minutes; and if you need we suggest you how many Squaremeters workshop is better for you, you can tell us your plan production, then we can tell your how many machines you needs, then tell you how much Squaremeters workshop is better for you.

Above description is only our company own features, if you see the very 100% same description like above words or see the same pictures with us in alibaba, please donot believe that,they copy our information and pictures, about the words, they directly copy,about the pictures, they copy and then use the PS skill to remove our company marking and then mark their company marking on the machine, please careful to check, the above machine features are designed by our Jinan Better Machinery Co.,Ltd.. the true evidence is that you can come to visit our factory and check all these machines true production condition. Thanks for your kind understanding!

2.Technical parameters

3.Model RDJ-B photos

This hot melt glue extrudering machine must work together with the extruder work table, then it can work perfectly. (This price include the extruder machine and the work table)

4.The other design model RDJ-B photos

5.Kindly note

6. Related series insulating glass processing flow chart

Note:

Besides you buy the basic vertical production line, you also need to add some accesary machines, such as Butyl extruder machine, two component coating machine, alu-spacer cutting saw, glass adge polishing machine etc.

In above processing chart, the hot melt glue machine can replace the two compnent coating machine.

7.Insulating glass/double glass/hollow glass good advantages

1).sound insulation, noise reduction

2).keep warm

3).dust prevention

4).reduce thermal radiation

8.Insulating glass/double glass product

9.Contact information

10.After service

1). We will provide all spare parts needed for maintenance of the equipments.

2). During the period of guarantee, within TWELVE(12) months, the seller we will be responsible for the damage due to the defects in designing and manufacturing.

3).If you need installation, please inform us, we can send engineer to your factory to install and test machines for you.

WHY YOU CHOOES US Question AND Answer (If you see same 100% description in other company website on alibab, they copy us, please kindly check and compare.)

1.Question:Are your manufacture?

Answer:we are manufacture of the PVC window door machine, Aluminum window door machines, insulating glass machines.

2.Question:What’s the costomer service ?

Answer:

1).reply within 12 hour

2).deliver max. days within 15 days (If some machines, such as the lock hole milling machine,end milling machine,etc. this is small model, we have in store, and can delivery for you soon within 3-5 days after get your deposit)

3).one to one service

4).24 hours for after -sale serive

5).7 years experience in foreign trade

6).fluent english ,communication barrier free

3.Question:What’s the guarantee ?

Answer:

1).Our guarantee for 1 year.

2).24 hour’s technical support by email or calling

3).English manual and video tutorial

4).one year quality guaranty for the machine (excluding the consumables)

5).We will provide the consumable parts at an agency price

6).24 hours on line service each day, free technical support.

4.Question:if our price is higher than another company or factories ?

Answer:

plaese check, what is is the different of the machine parts ,service and guarantee,especially the machine inner electric parts, sometimes, if machines have breakdown, the most reason is the machine inner electric parts problem, but we use the world famous brand parts to install to machines inner, so that can sure you can use the machines very long long years.

belive you will chooes the same value of the machine, not cheaper equipement

5.Question:How long is the delivery time ?

Answer:

For standard machines, it would be 3-15 days; For non-standard machines and customized machines according to clients specific requirements, it would be 15 to 30 days.

6.Question:How's the payment ?

Answer:

Telegraphic Transfer(T/T). or L/C. (If you want by west union, it is also ok.)