Manual thermoplastic hot melt road marking machine

Product profile 

XDRJ-S100/150/200/300 Hand-moving thermoplastic marking machine is a special road marking equipment for various reflective lines, such as road centerlines, lane dividers and marking lines at the place like airport, such as straight lines, dotted lines, curve line, directional arrows, word writing.
A variety of marking lines, such as straight lines, dotted lines, curves, guiding arrows, and writing, can be marked with reflective road centerlines, lane dividers and airports.
This marking machine could match different coating bucket of 100mm,150mm,200mm 300mm,400mm,450mm as per the width request of road marking lines.

Features

 The machine is designed and manufactured by our factory which absorb the advantages of similar products at home and abroad, features listed below.
1,Reasonable design, simple structure, flexible operation, convenient use, less labor cost.
2,The marking line is uniform and clear.
3,The discharge port is easy to open and close, easy to mark uniformly.
4,The glass beads sowing device has two dropping ways. One is self-dropping, the other is ration. Self-dropping way could be adjusted as per engineering design at any time. Ration way's dropping quantity meet the GB5768 standard.
5,The coating bucket is convenient to open, the marking lines' origin and end could be perpendicular to the lines, and it can guarantee the marking quality.
6,It is safe to use and easy to maintain.
7,Rubber wheel was made of good rubber(exclusive formula) , with moderate hardness, good elasticity, high temperature and wear resistance, aging resistance, exclusive used by our factory.