SYD-261-1 Closed flash point tester

Brief introduction

The instrument was developed for the determination of flash point higher than 40 ℃ closed method of flash point of petroleum products.

Features

1. The instrument is the biggest characteristic is: heating rate and accurate, and conform to the requirements of the GB/T 261-2008 standard

2. Using single-chip microcomputer control technology and LCD screen display, man-machine dialogue interface in Chinese, the heating power continuous stepless adjustable, convenient parameter Settings.

3. Liquid crystal display with tooltips menu, type of input interface, display Settings parameters and real-time display of sample temperature and test parameters, flash point appeared to record key, display shows and keep flash point value.

4. Novel design, compact structure, beautiful stainless steel mesa, users only need to match on gas or other civil gas can be tested, easy to use, the test results are accurate.

The instrument is the biggest characteristic is: heating rate and accurate, and flash point whether there only artificial observation, the rest are completed by the instrument, instrument of the cost-effective.

Technical parameter

1. Working power supply: AC (220 + / - 10%) V, 50 hz.

2. Heating equipment: (1) furnace for silicon carbide materials, power is 600 w electric wire.

Heating power adjustable from 0 ~ 600 w.

3. Sample heating rate: A step: 5 ~ 6 ℃ / min;

B steps: (1 ~ 1.5 ℃ / min;

Automatic control.

4. Electric device: (1) mixing motor (BYGH101 stepper motor).

(2) mode of transmission: soft shaft coupling.

(3) mixing blade specifications: 8mm x 40mm.

5. Stirring speed: in accordance with GB/T 261-2008 standard requirement.

(1) (90 ~ 120 RPM), suitable for A test step.

(2) (250 + 10) r/min, apply to test step B above.

6. Firing device: (1) lead fire: gas (or other civil gas, the same below).

(2) Aperture (0.7 ~ 0.7)mm.

7. Temperature measuring probe: Pt100

8. Environment temperature: 35 ℃ or less.

9. Relative humidity: 85% or less.

10. Whole machine power consumption: no greater than 650 w.

11. Appearance size: 340mm x 330mm x 380mm (length x width x height).