ZR-7010 Portable air particulate concentration analyzer

  Product introduction
The instrument adopts principle of β-ray absorption weighing to automatically and accurately measure PM2.5 or PM10 particles captured on  filter membrane, and automatically monitors concentrations of PM2.5 and PM10 in the environment continuously. The instrument is small in size, easy to carry and install, has dustproof and rainproof characteristics, and can work automatically continuously for a long time outdoors.

The instrument complies with relevant provisions of GB3095-2012 and HJ653-2013, and is widely used in routine environmental air quality monitoring, environmental assessment, scientific research, emergency monitoring and environmental air monitoring station data comparison.
Executive standard
GB3095-2012 Ambient Air Quality Standard
HJ653-2013 Technical requirements and test methods for continuous automatic monitoring system for ambient air particulate matter (PM10 and PM2.5)
Q/0212ZRB013-2014 Portable Air PM2.5 Concentration Tester
Technical characteristics
Direct measurement of mass concentration of particulate matter using advanced β-ray absorption weighing + DHS (Dynamic Heating System)  principle, independent of particle physicochemical properties Impact, without correction, providing accurate data in real time, 24/7;
With dynamic temperature and humidity compensation function, in line with national standards, it can ensure accurate measurement of semi-volatile nitrates and organic matter;
Different cutters are available for real-time measurement of PM10 and PM2.5 concentrations;
Use low activity C14β source, safe and reliable;
Wide temperature industrial touch screen, easy and fast to operate;
The sampling intake pipe has a heating device, and the sampling air is automatically dehumidified according to the set humidity value;
Automatically measure parameters such as temperature, humidity and air pressure, and automatically convert the standard state sampling volume;
The instrument can automatically store historical data, can be printed on site or exported with a USB flash drive;
With digital and analog output interfaces, it is easy to connect to the data acquisition instrument for network transmission;
With wireless communication module, it can remotely query the working status  of the instrument and real-time measurement data;
The instrument automatically saves the current data after power failure, and  the instrument can continue to sample after the call;
The instrument has independent test procedures for broken tape, filter paper  exhaustion and mechanical failure;
If there is a problem, the instrument will automatically alarm and protect the  instrument;
Good portability, rapid on-site installation, AC and DC, continuous automatic operation, can be used for a variety of testing purposes;
Optional wind direction wind speed sensor with automatic heating and data   logging.

Technical Parameter 

 Instrument configuration