Printshop Use Hot Melt Adhesive

Printshop Use Hot Melt Adhesive

Hot Melt Adhesive

CHARACTERISTICS

Good flowability and bonding strength 

Less odor, less VOCs

FIELDS OF APPLICATION

Binding at both book spine and side, mainly used for letter paper, documents, etc. 

TECHNICAL DATA 

PACKAGING

25kgs/kraft bag

APPLICATION METHOD

Service temperature 155±5℃, ambient temperature 17~30℃;

Preheat the glue at least 2h, ensure that the glue melts completely, and use it until reach the target temperature;

Raking depth 1.5mm±0.5mm, slotting depth 1.5mm±0.5mm, slotting interval 5.0~7.0mm;

INSTRUCTIONS FOR USE

The flowability and setting time changes along with the room temperature of working shop, please adjust the temperature of melting tank and speed of binding machine;

Do not mix with glue from other suppliers;

Suggest to use the glue in season, especially avoid mistaking “summer glue” and “winter glue”;

Suggested working humidity at RH50%±10%;

Clean the preheat tank once per season, melting tank once per two weeks;

Books shall be stored at 0~40℃, shall not be stored outdoors and heat source.

SHELF LIFE AND STORAGE CONDITIONS

Shall be stored in indoor, cool and dry place, avoid direct sunlight and constant high temperature

2 years (sealed)

REMARK

These shown data is based on our knowledge and experience. This also applies to any third party property rights. Customers must check that the products are suitable for their processes and usage.