NYRD-86 High Frequency Radar Level Meter

High Frequency Radar Level Meter

Design features:

Small antenna size, easy to install; non-contact radar, no wear, no pollution

Hardly affected by corrosion or foam; hardly affected by changes in water vapor, temperature and pressure in the atmosphere.

Severe dust environment has little influence on the work of high frequency level gauge.

Shorter wavelength, better reflection on inclined solid surfaces

The beam angle is small and the energy is concentrated, which enhances the echo ability and helps to avoid the interference.

The measurement blind area is smaller, and good results can be obtained for small tank measurement.

High signal-to-noise ratio, even in the case of switching, can achieve better performance

High frequency is the best choice for measuring solid and low dielectric constant medium

Application:Strong corrosive liquid

Antenna material: PFA

Measuring range: 30 meters

Frequency range: 26GHz

Accuracy: ±5mm

Medium temperature: -40 to +130 °C

Process pressure: -0.1~1.0Mpa

Power supply: 24vDC (two-wire, four-wire optional)

Signal output: 4...20mA/HART (two lines/four lines)/ RS485/Mod bus

Process connection:Flange

Protection level: IP67

Explosion-proof grade: Exia IIC T6 Ga