Antomatic pull Insertion force compression tester Extension testing equipment

annex:

1. The   test conditions are set by the computer screen and can be stored. Select from   the drop-down menu or enter the data directly. (including test category,   measurement motion direction, load measurement range, stroke origin position,   stroke origin detection, measurement speed, total number of measurements,   pause time, each waiting position, air pressure number)

2. Can   store and print graphics (load-stroke curve, load decay life curve,   inspection report)

3. The   load protection function of the load cell is overloaded to ensure that the   load cell is not damaged;

4.   Simultaneous display of load-stroke curve and life curve;

5. The   automatic load zero is detected, and the origin can be set to detect the load   value;

6. The   load unit shows that N, lb, gf, and kgf can be switched freely;

7. Can   be matched with several load weights at the same time (1~200Kgf purchase)

8. The   machine adopts the steel structure design and the servo motor, which can   ensure the accuracy under long-term use, and is suitable for general   extension, compression test, and plug-in force life test;

9. The   over-standard value is stopped (in the life test, the test data exceeds the   upper and lower limit specifications and the machine stops automatically)

10.   Measurement project: maximum load value, peak value, valley value, load value   of stroke, stroke value of load, interpolation resistance value (optional),   load or resistance value of stroke (optional).