Industrial high speed potato noodle maker for lowest price

Product Introduction

This machine has a beautiful appearance, compact structure, easy operation. Its main function is to standard powder  (grains surface also available) and a noodle dough and hand-planar, with in the spout into the input to be pressed into the rotation and

Hand the same tendon Hele surface, directly into the pot system for food.

This applies to agencies, organizations, the military, schools, families, factories canteens restaurants, hotels and other

specialized market sectors.

Machine structure and working principle

This product is made of dozens of parts and electrical switches and other accessories base, column, bearing sleeve,

cylinder, auger, templates, which consists of sheaves and other works: by trough auger conveyor driven rotation and

extrusion, good will and hard and soft dough appropriate, into spout hole squeezed out by molding Serve noodles,

while the noodles into the boiling pot Serve.

Use and Operation

The ground electrical test: first template, remove the belt, followed by electricity, turning positive after determining

motor rotation (in the direction indicated by the arrow), and put on trial transfer belt closing a minute and then loaded

templates such as steering connection. When there is the risk of anti-corruption and templates parts.

The machine checks: mechanical parts must be checked before the boot is normal, loose screws, ground wire must installed.

Mobilization head: mobilize position before shutdown: brake set screws loose column head back and forth. Mobilize the level

of the position: The column set screw loose brake, then slowly loosening ring, screws can be adjusted on the nose down.

Template Removal: First note that rotation, the steering wheel should be the same groove, hard twist, such as the hand screw

fixed, the available wrench pulled.

Detaching shield cover: First loosen the screws by hand to open the cover, elastic belt mobilization.

Noodle and manufacturing: the standard powder with cold water and hand-made noodles and noodle and similar hard and soft dough, kneading away from the hand, cut into appropriate pieces, roll on the

dry flour stand (other edible flour, grains may face ). If less than kneading dough spout appears slimy, auger, and noodles sticky teeth and so on.

Feeding Operation: boot test turn one minute, you can be feeding pressure surface, and good will stand noodles, have been put

into the inlet, the auger extruded noodles directly pressed into the boiling pot, when finished press from the bottom of the template

with a small shovel to shovel under the remaining noodles, noodles sticking to timely dial stir boiling with water separation.

Scrub Cleaning: Remove the template soak into the water, cleaning is completed, press the demolition order complex original well.

Rust maintenance: After cleaning the barrel of the threads coated edible oil in the template, all rotating parts should always add oil

to the rotating flexible, to prevent corrosion.

Adjust the belt: belt slippage or too tight, it will die a total of four screws around the tail of the beam can be adjusted by loosening two distance.

Picture of potato noodle maker

About packaging, for small size or single machine, we can offer free fumigation wooden case with steel frame, it not only can protect machine from damage, but also avoid checking when exporting.

For multiple machines or production line, it's better to loaded in standard container 20GP, 40GP, 40HQ, usually it needs wrapped with plastic firstly, then loaded in container.

we can offer EXW, FOB and CIF terms.

EXW: You arrange the shipping details from our factory to your port by yourself.

FOB: We arrange freight transport to Qingdao, Shanghai or other ports of China, then you arrange the shipping details from China port to your country port.

CIF: We arrange all shipping details to your country port, and ensure machines smooth arrival.

Kaifeng Rainbow Machinery Co., Ltd. is a domestic large-scale new energy environmental protection equipment manufacturers in China. The registered trademark is "Rainbow".

Our company has combined Research and Development, Production, Sales and Service in one, and our main product have Wood Crushing and Recycling Workstation, New Energy Particle Machinery, Feed Machinery, Organic Fertilizer Machinery, Broken machinery. Totally, have a lots of products, more than 300models, which make our company the most professional development and production of high-tech enterprises of new energy environmental protection machinery manufacturer in China.

1. Help you choose the most suitable machine.

2. Making the machine according to your request.

3. Give you machine’s details and video for help you use the machine more better.

4. One year warranty

5. Quality problem,we will send you the accessories.

6. Free repair whole using life without extra charge.

1. What's the delivery time? 
We will deliver the product in 7 days after receiving the deposit.
2. What's your payment terms?
We can accept various payment terms if it is convenient for you.
3. what's your MAQ?
Our MAQ is 1 piece.
4. What's the lifetime of the wearing parts?
The material of our product is of high quality, and the lifetime of our wearing parts is twice longer than the others,including the roller skin, die and bearing.
5. What is your warranty?
12 months except the spare parts.
6. Will you send engineers to install the plant?
Of course yes,but at an extra cost will be paid by customers. Or you can get local contractors to do the commissioning and we send one supervising engineer.

7. Do you have some foreign customers using your equipments?
 Yes , we have customers all over the world.