433mhz 2w radio lora transmitter module ttl rs485 rs232 lora rf module 433 transceiver lora long range wireless communication

Specifications:

Products Features:

 ● Support UHF(410-470MHZ) user programming;  

● RS-232 and RS-485 ttl customized;

● Serial data rate 1200-9600bps settable，air data rate 240-9600bps settable by user;

● Short Transmitting-receiving transfer time; communication delay less than 3Ms;

● 3km-30Km LOS long range transmission distance;

● The highest sensitivity up to -136dBm; 

Technical Parameters:

Pin Definitions

XZ-DT78-L Frequency

Default frequency channel is CH0,frequency of the 0 channel can be arbitrarily set and saved by the software. Users can input/rewrite any needed Rx and Tx frequency in the software. 

Software Programming

1.1 Enter setup mode

Hardware: connect the 8th foot with Ground and green led keeps lighting, the module enters setup mode, serial port rate is 9600 8N1

Software: at the current baud rate, 3 + numbers are sent continuously, XZ-DT78 enters setup mode, and the serial port output is OK

Format    + + +

Return     OK

1.2 Channel 0 Frequency Setting(this frequency is the working frequency of 0 channel

Format     >WF0/RX:453.25000/TX: 453.25000

Return    

Explain    >WF0 means working frequency of writing channel 0

RX: means receiving frequency 453.25000 MHz, please notice frequency needs be accurate to 5 digits after the decimal point；

TX: means transmitting frequency 453.25000 MHz, please notice frequency needs be accurate to 5 digits after the decimal point；

The same XZ-DT78 receiving and transmitting frequency setup can be the same or different, but modules in the same communication system must have the same receiving and transmitting frequency. Dip Switch can only set frequency in Channel 0. 

1.3 Interface Baud rate setup

Format     >WBA

Return    

Explain     >WB means writing interface baud rate

A~E means1200~9600bps；A=1200L, B=1200H, C=2400, D=4800, E=9600

Remark：A=1200L,1200 interface,240bps air transmission, the longest distance communication.

1.4 Parity Bits Setup

Format     >WVN

Return    

Explain    >WV means Interface Parity Bit

N、E、O means 8N1、8E1、8O1

1.5 Read all Parameters Command

Format    >R

Return  

Explain    Output XZ-DT78 current working parameters

1.6 Exit Setup Mode

Format     >E

Return     OK

XZ-DT78 exit setup mode, if XZ-DT78 enters setup mode it will exit when it does not have any command actions at continuous 60S.

Standard Accessories:

rs232&rs485 programming cable

small sucker antenna

Company Information

Shenzhen Thingsend Communication Tech Co.,Ltd

Email:sales（at）thingsend(dot)com

Website: www.ur-brand.net www.ur-brand.net www.ur-brand.netwww.thingsend.com/en

Contact:sarah yuan

Skype ID:+86 188 2073 9215 (skype name:wireless solutions-sarah yuan)

We're professional manufacturer of  wireless sensors,2g 3g 4g lte GSM modem,Lora,wireless radio modems,OEM/ODM,wireless customized solutions/system/applications.

Welcome to contact Sarah for more information about wireless solution.