Hardened steel Mold Finishing with High quality CBN Cutting Insert Finishing

Hardened steel Mold Finishing with High quality CBN Cutting Insert Finishing

1. Halnn Tools Hardened steel Mold Finishing with High quality CBN Cutting Insert Finishing

The machining characteristics of hardened steel:

(1) Hardened steel has high hardness, high strength and almost no plasticity;

(2) When processing high-hardness hardened steel parts, the cutting resistance is large and the cutting temperature is high;

(3) Due to the high brittleness of the quenched steel, it is not easy to produce built-up edge, and the surface roughness of the workpiece is not easy to guarantee;

(4) The thermal conductivity is poor, and the cutting heat is difficult to carry away by the chips.

For the processing of such high-hardness steel after quenching, Halnn Tools offers a variety of tool solutions:

(1) Intermittent cutting tool grade of hardened steel mold--BN-S20, high hardness, wear-resistant and anti-fracture, under high-speed cutting state, subject to intermittent cutting without chipping;

(2) Hardened steel mold finishing tool grade--BN-H10 / BN-H21, high hardness, good wear resistance, strong impact resistance, flexible clamping method of machine clamp, high precision and rough machining of hardened steel parts Good (can be stabilized within Ra0.8).

2. Characteristics of CBN Cutting Insert

3. Detailed data of  CBN Cutting Insert

4.Application Case

Hardened steel Mold Finishing with High quality CBN Cutting Insert Finishing

5.Image

6. Contact us

If you have another question, pls feel free to contact us as below: