Home > Products > Sun Shade Sail > Factory Supply Triangle Shade Sail for Carport , Sun Shade Sail Nets
Factory Supply Triangle Shade Sail for Carport , Sun Shade Sail Nets
USD $2,500 - $2,650
/ Ton
2 Tons(Min.Order)
- 100 Ton / Tons per Month
- Qingdao Port
- T/T Credit Card
You May Like
-
Commercial Shade Sail Wind screen Canopy Green Generation Commercial Net
-
Garden shade sail, triangle shade sail carport, hdpe shade sail
-
Outdoor shade sail cloth/sail cloth shade/triangle sun sail shade
-
Garden sun shade sail cloth , discount shade sails, wave shade sail
-
High quality and lowest price car packing sun shade net
-
New design HDPE plastic shade, car park sun-shade sail
Product Details
| Brand Name | dingrui | Place of Origin | Shandong, China | |
| Model Number | DR-1 |
Product Description
Feicheng Dingrui Plastic Co.,Ltd
Factory Supply Triangle Shade Sail for Carport , Sun Shade Sail Nets
Product Description
| Description | sun shade netting |
| Material | 100%virgin HDPE And Polyester |
| Net Weight | 160-320G/M2 |
| Shading rate | 95% |
| Colour | blue;black(as per required) |
| Width | 0.6-6M(as per required) |
| Roll Length | 1-50M;1-100M;1-200M (as per required) |
| Type | Wrap knitted :(Two-needle shade netting, three-needle, four-needle, six needle and eight needle netting) |
| U.V. | as customized requirement |
| M.0.Q. | 1.5-2T |
| Terms of Payment | T/T;L/C |
Product Application
Finished Products
Pad Eye;
Used to attach shade sail corner ring to a wall in conjuction with "D" shackle.
In size 6mm or 8mm, other sizes are available on request;
S Hook;
used to link shade sail corner to pad eye or eye bolt;
Normally in size 6mm or 8mm, other sizes availabe on request
Turnbuckle;
used to attach shade sail corner ring to a fixing point and provide tension to the sail.
Size in 8mm or 10mm;
Eye Bolt;
used to to form a fixing through a timber post.
Size: 8x130mm, other size available on request.
D Shackle;
Used to link shade sail corner to pad eye or eye bolt.
In size 6mm or 8mm, other sizes available on request
Snap Hook:
used to link shade sail corner to pad eye or eye bolt.
Size mostly in 8x80, 10x100mm
Chains;
Used to fix shade sail;
In size 4mm x 2metre
Master Cleat.:
Used to hold rope for shade sail;
B- In size 5inch
How to make a shade sail
Gather your supplies
Suitably sized and shaped sail (see Notes, below)
100mm dia. x 4mm wall thickness galvanised steel posts
Concrete mix (4 bags per post)
Suitable stainless-steel fixings for attaching sail to your combination of posts, fasciae and walls. These include eye bolts for posts, pad eyes for wall fixings, external-grade Chemset chemical anchor (if fixing into masonry), U-bolts, strap tensioners, S-hooks, D-shackles, fascia supports and turnbuckles
Step 1
Lay sail out on ground. For a 5 x 3m sail running parallel to wall, it should be 300mm from wall to allow for tensioning. Mark out positions of posts and wall or fascia fixings, allowing an extra 300 and 500mm from each corner to allow for tensioning. Square and rectangular sails are normally installed as a hyperbola, so diagonally opposite posts or fixing points are high or low.
Step 2
For each post, dig a 400 x 400mm hole 800-1000mm deep. If ground is firm, lay about 100mm of 20mm aggregate in base of hole. If ground is soft, pour about 100mm of concrete in hole.
Step 3
Bore a hole near bottom of pole and insert a galvanised steel bolt with nut. This keys post in concrete and stops round posts rotating. Fit a heavy-duty, stainless-steel eye bolt 50-100mm down from top of posts. Use double nuts (1 a lock nut) so it cannot undo.
Step 4
Stand posts in holes with eye-bolt facing diagonally opposite post. Brace posts with temporary props and ensure they are plumb in 2 directions.
Step 5
Fill each post hole with a fairly dry concrete mix and tamp concrete well. For most smaller sails (under 5m square), posts can be vertical, but for larger sails, move top of post away from opposite post by 150-200mm, so it leans out from sail slightly to help take the strain. Re-tamp concrete and finish surface with a slight slope away from post so water can drain. Let concrete cure for 24-48 hours.
Step 6
While concrete cures, secure wall and fascia pad eyes, if required. Never rely on the fascia alone; fit fascia supports to fasciae and rafters first to give adequate strength. If fixing to masonry, use an appropriate anchor system. In many cases, a chemical anchor is ideal, but an alternative is to use epoxy together with a conventional masonry anchor.
Step 7
Once concrete has cured, spread sail back out on ground. Attach fixings to corners of sail with turnbuckles wound out to as slack as possible (you will need turnbuckles on at least 2 corners). Lift each corner to an eye bolt, then tension sail using turnbuckles or tension straps. If you need to extend length of fixing, use straps. Re-tension fixings as necessary over time and clean sails periodically.
Used to attach shade sail corner ring to a wall in conjuction with "D" shackle.
In size 6mm or 8mm, other sizes are available on request;
S Hook;
used to link shade sail corner to pad eye or eye bolt;
Normally in size 6mm or 8mm, other sizes availabe on request
Turnbuckle;
used to attach shade sail corner ring to a fixing point and provide tension to the sail.
Size in 8mm or 10mm;
Eye Bolt;
used to to form a fixing through a timber post.
Size: 8x130mm, other size available on request.
D Shackle;
Used to link shade sail corner to pad eye or eye bolt.
In size 6mm or 8mm, other sizes available on request
Snap Hook:
used to link shade sail corner to pad eye or eye bolt.
Size mostly in 8x80, 10x100mm
Chains;
Used to fix shade sail;
In size 4mm x 2metre
Master Cleat.:
Used to hold rope for shade sail;
B- In size 5inch
How to make a shade sail
Gather your supplies
Suitably sized and shaped sail (see Notes, below)
100mm dia. x 4mm wall thickness galvanised steel posts
Concrete mix (4 bags per post)
Suitable stainless-steel fixings for attaching sail to your combination of posts, fasciae and walls. These include eye bolts for posts, pad eyes for wall fixings, external-grade Chemset chemical anchor (if fixing into masonry), U-bolts, strap tensioners, S-hooks, D-shackles, fascia supports and turnbuckles
Step 1
Lay sail out on ground. For a 5 x 3m sail running parallel to wall, it should be 300mm from wall to allow for tensioning. Mark out positions of posts and wall or fascia fixings, allowing an extra 300 and 500mm from each corner to allow for tensioning. Square and rectangular sails are normally installed as a hyperbola, so diagonally opposite posts or fixing points are high or low.
Step 2
For each post, dig a 400 x 400mm hole 800-1000mm deep. If ground is firm, lay about 100mm of 20mm aggregate in base of hole. If ground is soft, pour about 100mm of concrete in hole.
Step 3
Bore a hole near bottom of pole and insert a galvanised steel bolt with nut. This keys post in concrete and stops round posts rotating. Fit a heavy-duty, stainless-steel eye bolt 50-100mm down from top of posts. Use double nuts (1 a lock nut) so it cannot undo.
Step 4
Stand posts in holes with eye-bolt facing diagonally opposite post. Brace posts with temporary props and ensure they are plumb in 2 directions.
Step 5
Fill each post hole with a fairly dry concrete mix and tamp concrete well. For most smaller sails (under 5m square), posts can be vertical, but for larger sails, move top of post away from opposite post by 150-200mm, so it leans out from sail slightly to help take the strain. Re-tamp concrete and finish surface with a slight slope away from post so water can drain. Let concrete cure for 24-48 hours.
Step 6
While concrete cures, secure wall and fascia pad eyes, if required. Never rely on the fascia alone; fit fascia supports to fasciae and rafters first to give adequate strength. If fixing to masonry, use an appropriate anchor system. In many cases, a chemical anchor is ideal, but an alternative is to use epoxy together with a conventional masonry anchor.
Step 7
Once concrete has cured, spread sail back out on ground. Attach fixings to corners of sail with turnbuckles wound out to as slack as possible (you will need turnbuckles on at least 2 corners). Lift each corner to an eye bolt, then tension sail using turnbuckles or tension straps. If you need to extend length of fixing, use straps. Re-tension fixings as necessary over time and clean sails periodically.
FAQ
Contact
Contact Us
- Army Green Copper Tarpaulin Co., Ltd
Product Categories
| BAGS | Furniture cover | GAZEBO | Geocell |
| Greenhouse | PE tarpaulin | PVC cover | PVC tarpaulin |
| Safety net | Sun Shade Sail | Ungrouped |
New Products
-
plastic sun-shade net, eco-friendly sun shade net, hot sale shading mesh
-
HDPE Waterproof shading mesh, practical sun-shade sail
-
china factory supply shade sails, UV treated shading mesh
-
Uv radiation triangle shade sails, garden shade mesh
-
car park sun shade sail, radiator cover mesh, plastic garden mesh
-
Waterproof Fabric Outdoor Garden Triangle Sun Shade Sail
-
Outdoor Sun Shade Sail for Car Parking /Pool Covering
-
Garden sun shade sail with UV treatment nursery shade mesh
-
Cheap eco-friendly sun shade net, hot sale sun shade sail
-
New HDPE sun shade sail,virgin material home garden shade sail
-
outdoor garden shade sail, virgin material sun shade sail
-
cheap price sun shade sail , car park shade sail
-
Outdoor sun cover heat resistance shade sail,anti-UV garden sun cover shade net
-
Outdoor Sun shade Sail/Triangle Sun Shade Sail /Square Sun Shade Sail
-
Waterproof Sunshade Sail/Sun shade Sail
-
High Quality HDPE Sun Shade Sail for Car Parking /Pool Covering
-
HDPE Plastic Waterproof Sun Shade Sail For Garden & Patio
-
high quality sun shade sail, customized color sail
-
HDPE Sun Shade Sail
-
Heavy Duty PVC Bags Prefect For Moving And Storage
-
low price pallet protective cover, pvc waterproof pallet cover
-
dustproof uv protection pvc pallet cover
-
muti-proof plastic pallet cover, heavy duty reusable pallet cover
-
waterproof plastic pallet cover, dustproof pvc pallet cover
Popular Searches
- breast pump medela
- babies water bottl
- Newborn Baby Rattle Toy
- baby infant toy
- infant toy
- Baby Teether Toy
- Silicon Baby Teether Toy
- wooden teething ring
- Food Dispensing Spoon
- silicone pendant teething wholesale
- silicone teething pendant
- toy link
- animal plush pacifier baby
- babies teething
- soft silicone beads bpa free
- Silicone Teether Toy
- wooden pacifier clip
- Teether Teething Toy
- metal pacifier clip
- Teether Rattle Toy
- silicone giraffe teether
- intelligence toys
- rubber teether toy
- Silicone Baby Toddler Toy
- owl silicone teether
- infant rattle toy
- Plastic Baby Rattle Toy
- suspender pacifier clips
- baby bottle warmer for car
- Activity For Baby Toy
Recommended Products
- Mum Automatic Breast Pump, Plastic Breast Pump, Electric Breast Pump, Manual Breast Pump, Powerful Breast Pump Processing Customisation
- Mum Automatic Breast Pump, Plastic Breast Pump, Electric Breast Pump, Manual Breast Pump, Powerful Breast Pump Processing Customisation
- Mum Automatic Breast Pump, Plastic Breast Pump, Electric Breast Pump, Manual Breast Pump, Powerful Breast Pump Processing Customisation
- Mum Automatic Breast Pump, Plastic Breast Pump, Electric Breast Pump, Manual Breast Pump, Powerful Breast Pump Processing Customisation
- Mum Automatic Breast Pump, Plastic Breast Pump, Electric Breast Pump, Manual Breast Pump, Powerful Breast Pump Processing Customisation
- Mum Automatic Breast Pump, Plastic Breast Pump, Electric Breast Pump, Manual Breast Pump, Powerful Breast Pump Processing Customisation
- Mum Automatic Breast Pump, Plastic Breast Pump, Electric Breast Pump, Manual Breast Pump, Powerful Breast Pump Processing Customisation
- Mum Automatic Breast Pump, Plastic Breast Pump, Electric Breast Pump, Manual Breast Pump, Powerful Breast Pump Processing Customisation
- Mum Automatic Breast Pump, Plastic Breast Pump, Electric Breast Pump, Manual Breast Pump, Powerful Breast Pump Processing Customisation
- Mum Automatic Breast Pump, Plastic Breast Pump, Electric Breast Pump, Manual Breast Pump, Powerful Breast Pump Processing Customisation
- Mum Automatic Breast Pump, Plastic Breast Pump, Electric Breast Pump, Manual Breast Pump, Powerful Breast Pump Processing Customisation
- Breast pump manual suction large silica gel breast milk baby feeding
Find Similar Products By Category
- Light Industry & Daily Use > Baby Goods > Feeding Supplies
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Army Green Copper Tarpaulin Co., Ltd
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
sales
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile