High Precision and Heavy-duty Conventional Universal Horizontal Lathe/CW61200@11000mm in Length

This machine is characterized by its large power, high rigidity, high spindle speeds in a wide variety and is suitable for heavy and high speed cutting operations. The machine is suitable for facing , turning external and internal cylindrical surfaces as well as cutting of a wide range of different metric, English, module and diametral pitch threads, It can be used for drilling, trepanning and boring operations as well. Braking and rotating-direction change of spindle is controlled by hydraulic power with sensitive and reliable performances. By the manipulation of a push button spindle speed change can be made to a higher or lower step without stopping the machine. Lubrication in the headstock is effected by forced pressure oil while spindle speed ranges are furnished for selection by user when placing order. The apron is provided with a safety device to protect the machine against overloading. The top slide may be operated by power for cutting short taper surface. The combination of longitudinal feed of the saddle and feed of the slide facilitates the cutting of a long taper surface on this machine. All guideways on the bed are casehardened to prolong their service life. The centralized levers can be easily and conveniently operated.

			CW61200
Max. swing diameter over bed			2000mm
Maximum length of the workpiece			11000mm
Max swing diameter over carriage			1580mm
Max swing diameter over gap
Length of the gap
Spindle bore			130mm
Taper in spindle nose			Dukes140
Number of speeds	21Kinds		21kinds
	12Kinds		12kinds
Spindle speed range (it could be manufactured according to the clients specific requirements)
n1*	forward		2-200r/min
	reverse		2.24-178r/min
n2	forward
	reverse
Range of feeds per spindle rotary			56 kinds
Longitudinal			0.1-12mm
cross			0.05-6mm
Top slide			0.025-3mm
Thread pitch scope of the metric system			44Kinds 1-120
Englishmen scope Thread			31Kinds 24-1/4t.p.i
Range of module threads			45Kinds 0.5-60mm
Range of diametral pitch threads			38Kinds 1/2-56DP
On the itinerary largest bed			Maximum length of the workpiece cut 50mm
Carriage ( Two sets are fitted for machine with center distances of 11,000 mm)
max cross travel of lower slide				1010mm
Max travel of mid slide				300mm
Max travel of top slide				200mm
Rapid traverse speed of tool post		3740mm/min		3740mm/min
		1870mm/min		1870mm/min
		935mm/min		935mm/min
Diameter of tailstock quill				180mm
Max travel of quill				300mm
Taper in bore of tailstock quill				Dukes80