H50/1 mitsubishi controller disc servo motor tapping machine

The casting wood of the lathe adopts with the casting of aluminum wood and the resin sand mould. The workbench is the type of HT300, and the rest are the type of HT250. After twice artificial aging treatment, it has the good stability and high intensity, and the precision is stable and reliable.
The lathe chooses the spindle specifications for BT50, diameter is 190 mm。The full set of spindles are all imported from the professional manufacturers in Taiwan. (Posen or Nutrilite tsubaki). All the important components are strengthened. It adopts the P4 level world famous brand bearings which specialized in spindles. And it uses KLUBRNBU15 grease to lubricate. After the complete set of spindle assembling under the condition of constant temperature, all the spindles need to correct the balance and running test through the computer, which can make the complete set of spindles long service life and high reliability.

The characteristics 

◇The main motor is located in the center of the spindle box, so the stress and the thermal deformation is symmetrical, and it also has a good thermal stability.
◆Large torque: 

BIIP30, which can guarantee the high torque at low speed and high constant power range.
◆Compared with the same specification lathe, it is of large processing range and small covering area. 

Machine Parts

The system has a perfect and reliable interlocking, safety protection and fault diagnosis alarm functions etc. It equipped with RS232 communication interface for computer controlling and storage to realize DNC machining (There will be differences between different systems).