20 Inch China Cutter Dredger Machine

Weifang Jin Meng Dredger Co.,Ltd. located in Qingzhou, Weifang City, is a manufacturer for Cutter dredger, work boat and gold dredging equipment,which is specialized in cutter dredger researching, designing, production and sales.

We have professional R&D department, CAD drawing design center, quality control department and after sales service department. Our company has more than over 500 employees, including 5 professional senior engineers on cutter dredger building and researching, 16 designers on machinery construction, 8 engineers on quality inspecting and controlling as well as 10 after sales service engineers.

Cutter head

For one cutter head, there are 5 blade, 6 teeth equipped on one blade. There is material Cr. for easy-wearing proof.

Cutter head is driven by hydraulic motor; cutter bearing has lubrication seal-in units.

Hydraulic system:

The most important parts of cutter dredger and wheel bucket dredger. The hydraulic system requirements are very high and strict; it’s the main artery of the entire cutter dredger. Lateral traction winches, lifting winch and cutter head of the dredgers are driven by hydraulic motors.

Cummins engine

Testing equipped on the discharge pipeline on the cutter dredger. The cutter dredger has Cummins engine and hydraulic system for easily operation.

KINDA Pump

Flow passage components use High wear resistant alloy Cr27 to prolonged the pump service life, pump shaft seal use packing seal which is easy to maintain , and antifriction bearings are from Janpanese brand NSK.

Answer:

Yes, it must be. Each cutter dredger must be tested very well before ex-factory so that can guarantee cutter dredger performance at customers' working sites and save the time and cost for customers. Before test we will send invitation letters to the clients to invite them come and do the performance inspectation by themselves, after get the clients permition and the cutter dredger will be transported to the port for loading.

Answer:

There are two ways for cutter dredger being transported, if the cutter dredger size smaller than JMD350, it is easy to transported by containers; if the cutter dredger size is larger than JMD350, it will be transported by bulks. The cutter dredger structure is dismountable and assembled so that can be easy transported by trucks on road.

Answer:

After cutter dredger arrive at clients' working site, we will send two experienced enginneers for sand dredger body assembly and native workers' training. With the asist of ancillary equipment like excavators and cranes , the cutter dredger assembly can be finished within 10days and training can be in one week.