waterjet cutting machine for glass 2015

There are four parts in our mini waterjet cutting machine. They are intensifier pump; cutting table; CNC controller and Auto abrasive feeder.  

The technical parameters for cnc mini waterjet cutting machine showing in the following chart:

Mini waterjet cutting machine can cut almost any materials. Pure water jets can quickly and accurately cut soft materials such as rubber, foam and other gasket material. Abrasive water jets can cut almost any other material over a very wide range of thickness:

Mini waterjet cutting machine will be packed in standard packaging, which suitable for long distance ocean transportation and well protected against damage, moisture, shock, rust and handling.

CNC mini waterjet cutting machine have got the consistant high praise from the customer at home and abroad during the 15 years development, there are many successful stories related to APW mini waterjet cutting machine, we are looking forward to seeing you in our picture wall.

1. What are the benefits of purchasing a mini waterjet comparing CNC plasma or a laser ?

Versatility
Mini waterjet cutting machine can cut almost anything – from metal to stone to glass to composites to ceramic.
Laser and plasma cut with heat, and so can only cut materials that have the right thermal properties. Metal is almost always the target material in industry for these heat-based processes. And mild steel is almost always the metal that is cut by them. In addition, plasma can only cut things that are electrically conductive. To optimize laser and plasma cutting, change to gasses is required. No change to waterjet parameters, except speed, is usually required for any material. 
Thickness
Mini waterjet cutting machine can cut very thin and up to 150mm (sometimes more) of any metal, glass, stone, composite, etc.
Laser cuts very thin and up to 20mm.
Plasma cuts from about 25mm up to 30mm.
Edge finish
Nothing cut by a plasma or laser will be as high of quality of an edge as a mini waterjet cutting machine. We leave behind a smooth edge. No heat affected zones or mechanical stresses are introduced. The plasma and laser cut with heat (we cut with supersonic erosion). Plasma and laser therefore will leave behind a heat affected zones, mechanical stresses, and especially with plasma, dross 'drips' on the edge.

Please contact us for more information of our water jet cutting machine.

2. What kind of material does your mini waterjet cutting machine can cut?

There are plenty materials our mini waterjet cutting machine can cut , such as metal stone glass foam plastic rubber, ect.
4-axis was professionally designed for mable pattern and medallion.
5-axis was professionally designed for 3D materials.

3. What's your mini waterjet cutting machine's max.cutting thickness?

The max.cutting thickness of our mini waterjet cutting machine depends on the materials you cut .
Generally speaking, the thickness of our mini waterjet cutting machine can be up to 150mm, virtually Z constraint is the only limit to thickness.