High pressure manual sand blasting machine

The overall size of the equipment is 1200*9000*1900mm

Equipment workshop dimensions: 900 x 800 x 800 (mm)

Dedusting chamber pulse dedusting, air flow control

Dust removal fan 0.37KW. 220V 50HZ

Separator size

1 lamp with 22w floodlight

1 gun (aluminum alloy with boron carbide nozzle)

The shell is made of 2.5mm cold-tied steel plate by welding

A picture frame

1 sand bucket

1 foot switch

The table has two holes, one for both hands

Air pressure is 5____8 bar (kg/c m2)

The total power is about 0.38KW

The total weight of 0.36 T

Scope of application: treatment before electroplating and spraying to improve adhesion; All kinds of molds, casting parts, stamping parts, metal surface to remove oxide, residue, rust, oil, old parts renovation; Ceramic products, glass products, plastic products lighting, atomization, edge removal, deburr, enhance spray adhesion.

The advantages of sandblasting machine are:

1. the metal parts of the sandblaster are basically free from damage and the dimensional accuracy will not change.

2. the surface of the parts is not contaminated, and the abrasive will not react with the parts.

3. Sandblasting machine can easily handle grooves, grooves and other difficult to contact parts, a variety of granularity of abrasive can choose to use;

4. The cost of treatment is greatly reduced, mainly reflected in the improvement of the efficiency of the sandblasting machine, which can meet various surface finishing requirements.

5. low energy consumption and low cost.

6. sandblasting machine does not pollute the environment, and saves the cost of environmental treatment.

email：1602005722@qq.com