Emerson PSM A10 - monitoring module

1. Input characteristics of Emerson PSM-A10

DC input rated voltage: -48V/24VDC

Voltage range: 18V ~ 72VDC

Power: less than 20W

Working temperature: -5 C ~ 45 C

Two, display and setup functions of Emerson PSM-A10

The monitoring module can display the operation parameters, running state, alarm state, setting parameters and control parameters of the power system. The main contents are shown in the table below.

Three, the control function of Emerson PSM-A10

The monitoring module can send corresponding action instructions to the monitored objects according to the running state of the system. The monitor module supports two kinds of battery management modes, automatic and manual.

Four, the "four remote" function of Emerson PSM-A10

Telemetry function: the background host can get real-time simulation of the system through monitoring module.

Remote communication function: background host can get real-time switch quantity of the system through monitoring module.

Remote control function: the backstage host can realize 5 functions: module switchgear, system floating charge conversion, system control mode switching, alarm silencing, start / stop battery test.

Remote control function: by maintaining the software control and monitoring module, the floating charging voltage of each rectifier module can be fine tuned to ensure the current sharing effect of the module.

Five, the alarm and recording function of Emerson PSM-A10

The monitoring module can make sound and light alarm on the system fault according to the data collected, record the alarm, produce the corresponding action, and report to the backstage host at the same time