Ball screw

Blue ice bar professional manufacturing silk bar, can do the following points

Smooth exercise

The Ball screwtransmission system produced by us is a point-contact rolling motion. The friction resistance in the work is small, the sensitivity is high, there is no vibration at the start, and there is no crawling phenomenon at low speed, so it can precisely control the microfeed.

Second, high transmission efficiency

The transmission efficiency of the blue ice Ball screw transmission system is as high as 90 % ~ 98 %, which is 2 ~ 4 times that of the traditional sliding rod system. For example, it can obtain greater thrust with less torque. It can also be converted from linear motion to rotational motion(motion reversible).

III. High Precision

Our ball screw drive system has a small temperature rise in motion, and can pre-tighten the axial clearance and pre-stretch the wire rod to compensate for the thermal elongation. Therefore, higher positioning accuracy and repeated positioning accuracy can be obtained. High precision assurance

The ball screw is made of the highest level of machinery and equipment made in Japan. In particular, the temperature and humidity are strictly controlled in the research, assembly and inspection of the factory environment of various processes. Due to the perfect quality management system, precision can be fully guaranteed.

IV. Good Synchronization

Because of the smooth motion, sensitive response, no block, and no slippage of our ball rod, the same ball rod transmission system with the same sleeve at the same time drives the same parts or devices, which can achieve a good synchronization effect.