Made in China, powder mixer, horizontal mixer.

The 1. reducer is the main transmission structure of the mixer. It is located on the right side of the machine. At work, the motor is driven by a triangular belt, worm and worm wheel by the motor in the seat. At the 1:40 speed, the blender is driven. The axis of the worm is empty

The heart is equipped with a fixed key to make the impeller free to assemble and disassemble. 2 ring screws are installed on the top of the reducer for assembly, disassembly and installation. The end cover is equipped with a screw for the positioning of the high-speed impeller, which has been adjusted at the time of leaving the factory.

No need to adjust in use.

The 2. machine slot is of U shape, made of stainless steel and internally stirred paddle. It lies on the decelerator and recline reducer of horizontal mixer.

The 3. horizontal mixer is a whole structure. The motor is mounted on the movable plate on both sides of the machine seat. The motor can be adjusted by screw to make the triangular belt loose and keep the power transmission.

4. overall frame, sturdy structure, smooth operation, stirred blade and material contact of the full use of stainless steel, good corrosion resistance, the quality and cleanliness of the material, not discoloration,

5. the transmission mechanism is directly driven by worm wheel and worm. When used, there will be no loud noise and sufficient oil storage, so that good lubrication can be obtained.