Wet Type Peanut Peeling Machine

Capacity（kg/h）

200-220

200-220

300

150

Peeling rate（%）

98±1

92-95

92-95

92±1

Broken rate（%）

3±1

3±1

3±1

2

Whole kernel rate（%）

85-95

88±2

76±2

-

Input Power

0.75kw（220V, 380V optional）

Dimensions

Length * width * height=1080×800×1100（mm）

Low Peeling Rate

1.Soak a short time, the water temperature is too low, there are differences between varieties of raw materials

Note the time, adjusting the water temperature

2.Blade damage or blockage on knife around

Replace the blade, cleaning knife around and between the tire skin of bean ,sundries

3.Feed wheel is too high (skin, rice, beans from the blade too high, do not cut the skin incision)

Reduced feed wheel or knife to adjust the height (distance from the turret tire fixing screws within 4-6mm)

4.Feed wheel gap is too large or severe tire wear

Transfer a small gap, replacement the rubber wheel

Too many rice, kernels, beans on the skin after peeling 

The feed wheel is too high and skin removing roller axis distance is too large

Adjust low the feed wheel, let the skin attached to the shaft squeeze

Too many skin on the rice, kernels, beans

The feed wheel is too low，resulting squeeze the skin of the inner shaft left tire

Adjust high the feed wheel，

So crowded leather shaft with rubber tires, the wheels are expected to maintain good contact

Rejection does not turn the wheel or damaged skin

Adjustments, changing skin throwing wheel

After installing the chain, dumped skin throw wheel rotation in the wrong direction

Reinstall the chain

Too much rice,bean without skinning outflow by the bailing tank

Inconsistent with the induction of broken or induction of induce belt

Replacement or adjustment

The size of the raw material

Grading the raw material

Feed tire in contact with the sides of the screen blocking plate is too short

More shifting plate

High breaking rate after peeling

The rubber wheel gap is too small

Rising the gap of the rubber wheel

Raw soaking time beyond the technological requirements (time too long)

According to the process specified time soaking

Beans thrown from the rubber wheel

Feed rate too large

Reduce the feeding quantity

Too slow of the outlet tank and the feeder screen

Feeding screen loose fixtures

Inspection, fixed, repair and replace the gum cover

Reversing device fracture

Severe or too tight pouches worn shock