HWPS 9 bent steel power distribution cabinet

1. Frame of the cabinet is made by the steel with nine times bent for highly 

strength, we've chosen specialized support frame welded together, so the 

structure is firm, able to carry a heavy load. Arrangement of cables is quite 

handy. 

2. We apply SPCC cold rolled steel sheet or stainless steel sheet for all of our 

products, 2mm thickness of front door, 1.5mm thickness of panels, 1.2-

1.5mm thickness of top cover, 2.5mm thickness of galvanized mounting plate. 

3. Top cover, side panel, rear panel and bottom cover are fastened by bolts 

and fasteners, it's easy for both assembly and disassembly. Thus the 

installation in cabinet is much handier. 

4. All of doors, panels apply PU FOAM made by full-automatic numerical 

control Auto Gluer, and the door is 3 points locked(up, mid, down) which 

ensure that cabinet is highly enclosed. It meets the standard of IP55. 

5. Mounting plate can be adjusted back and forth for the distance of multiple 

of 25mm, interior devices can be adjusted vertically and horizontally for the 

distance of multiple of 25mm.       

6. The door, top cover, frame are all able to earth. There are 3 fixed shelf at 

the bottom for cable arrangement 

7. Swing door and single door are optionally available.130 degree door swing, 

the height of the door above ground is 25mm.The internal surface of the door 

has a frame with slots which separated by space of 25mm. In addition, it 

provides horizontal steel beam for strength and be more flexible for cable 

arrangement. 

8. base(optional)，we provide extra free slotting service on for optional