DC5V USB LED strip 5050 RGB Flexible Light 1M 2M TV Background Lighting RGB LED strip Adhesive Tape IP20 / IP65

Note:2meters LED Strip need USB output 2A ,otherwise the controller and led strip can not work well

Note:mini 3key is not with remote.17key remote not include battery. (CR2025/CR2032)

-1M 30LEDs / 2M 60LEDs 5050 RGB LED strip black PCB

-Can be used any devices with 5V USB

-Also can be used by your phone charger/adpater(5V).

-Waterproof IP65 / No waterproof IP20

-USB Cable is 0.9m

-Self-adhesive back with double side adhesive tape

Application: 

- DIY household lights for hallways, stairs, trails ,windows,Light up colorful home life
- Flexible ribbon for curving around bends 
- Architectural decorative lighting, boutique atmosphere lighting
- Decorative lights for holiday, event, show exhibition
- Applicable for automobile and bicycle decoration, border or contour lighting

Easy installation

1.Cut(As needed): Cut On the Cut Marks (White Lines) on the strip to desired length.
2.Peel: Remove the 3M adhesive backing on the strip. 
3.Firmly Press the strip in desired place and Connect the USB to USB port.
You can press the speed/bright key about 3 seconds to turn on/off the controller.
For the Color key,Model key,Speed/Bright key fuction, Please refer to the picture.

Attention:
1.Clean the dust,Ensure the back of your TV is free from dust before installation to avoid falling off.
2. For the usb port Electric current that A small part TV supplyed can't reach 1A/2A, When insert the led strip to TV usb port and it don't turn on or flashes sometimes, You can simply use the 5V 1A/2A Universal USB Wall Charger to power the led strip instead.
3.The frosted back CAN NOT firmly sticked.