Impulse & Cycling Test Stand & Proof Pressure Test Stand for Hose, Pipe, Tubing, Coupling

IVS Impulse test stand is applied to  performing the impulse/fatigue/life time test on automobile steering hoses, brake hoses, air-conditioner hoses, fuel pipes, cooling water pipes, radiator hoses, heater hoses, air filter hosse, turbo, Booster system hoses, engineering hydraulic hoses, aerospace hose & hose assemblies, other pipes or end fittings , heat exchanger , air conditioner, filters, etc

Technical data:

     · Max impulse pressure: 70Mpa (Accuracy: 0.1Mpa) 
     · Test waveform: Basic Square Waveform, T Waveform, Triangle Waveform, Sine Waveform *(Optional)
     · Frequency: 0~1.5Hz (Depends on the total volume & physical character.
     · Ambient temperature: Normal Temp or -40~150±3℃ 
     · Medium temperature: Normal Temp~150±3℃ or -40~150±3℃
     · Test pieces: 2-8 pcs (Depends on the total volume & physical character.
     · Test medium: Hydraulic oil or DOT
     · Pulsing cycles: >10 million cycles
     · Test waveform: Basic Square Waveform, T Waveform, Triangle Waveform, Sine Waveform *(Optional)Mounting mode: 180⁰ or 90⁰ (As per the standard)
     · Dimension:3modules:
     · PC console: customized size  
     · Power station: 1800mm×1200mm×1600mm  
     · Test Chamber:1500mm×900mm×1000mm

Features:

    · Fully automated test stand with high speed data acquisition system. 
    · History screen and real-time display of pressure-time curves. 
    · Test data saved automatically when emergency or power down happens accidently.
    · Multi-samples can be tested independently at a time.
    · From the control theory to the quality, advanced electrical components guarantee high test precision and stability.
    · IVS test software is programmable, stable and reliable. 
    · Automatic pressure maintaining reduced the working time of motor and pressurizing section, enhanced the stability, life time and pressure precision of whole testingsystem.
    · Equipment features overpressure/overload protection.
    · Auto stop testing when a rupture occurs, prevent the operators and equipment from damages to the utmost.
    · Automatically drain the air off remained in the test specimen at the beginning of the test.
    · Providing with various of fixtures to satisfy the connecting of hose and hose assemblies.
    · Installing distance adjustable freely as per hoses'minimum bend radius and test standards.
    · Impulse test with monflexing or without flexing. *(Optional)