Pneumatic Double Station Heat Press Machine

Specifications

This Swing Heat Press Machine ueses effective thicked plate with 8 heating pipe, bright-colored.,operation is very convenient.

The Characters of this Swing Heat Press Machine:

1.The hot plate uses the special ultra fine line-tube techonlogy ,can effectively keep the temperature equilibrating and stabilizing.

2. All-digital temperature display, the temperature error range at ±2.

3.Spiral pressure design ,easier to adjust wording pressure required at will Improved under support plate,causes the clothing been wrap conveniently,the pressure adjustive range is 6CM ,can process more widespread product.

Product Feture

1.Unique structure,reasonable design,max opening degree is 70°,it is very easy to operate.

2.Use the digital display tempreture control system,the tempreture's error exactly is ±1°.

3.Pre-adjust the pressure,change th pressure freely.

4.CE certification,single-LED display integrated automatic electronic timing,it will automaticly warns after finishing the process.

5.Use the good heat aluminum plate,electronic tube and heat plate are casting as one makes the heat    uniform and durable.

6.Telfon coated on the surface of heat aluminum plate,it is very convinient to clean.

7.With high tempreture elastic silicone pad to keep it not deform when it gets 400 degrees.

Specific Operating

1.Connect the plug with 220v,open the power switch,then its indicator lights(Attention:the whole machine must have the protecting land line)

2.Adjust the needed tempreture(actually 180-200°) and time(actually 40-45s)

 Tempreture sets up:press the push botton of SET one time,it shows SP station,then press + or - to set the needed tempreture,finish the adjusting tempreture

 Time sets up:press the push botton of SET the second time,it shows the SF station, then press + or - to set the needed tempreture,finish the adjusting time,then press SET push botton return to the warming interface.

3.Put the clothes on the silicone pad,then put the picture on the clothes,with the handle forced under pressure until it is completely closed;(the press is no more than 30kg,otherwise the handle will be deform)

4.When the time is up,the warning buzzers,then  put the handle back into place;

5.If the transfer paper is the hot one,pls tear it up at once;

   If the transfer paper is the cold one,pls tear it up after 10-15seconds.

Guangzhou Xinyan Heat Transfer Equipment Co.,Ltd

Contact     Susan Lee

Mobile     (86) 15817036414

Tel         86) 020-37421360

fax         (86) 020-37421360

Guangzhou Xinyan Heat Transfer Equipment Co.,Ltd

Add      No.3 Liangchengzhong Road, Zhongluotan Town, Baiyun District, Guangzhou, China

Web    , www.gzxingyan.en.china.cn