SG01S-18S Broadband SiC Based UV Photodiode A = 0.06 mm2

SG01S-18S
Broadband SiC based UV photodiode A = 0.06 mm2

◆ SG01S-18S UV Photodiode General Feature

Properties of the SG01S-18S UV Photodiode
? Broadband UVA+UVB+UVC, PTB reported high chip stability
? Active Area A = 0.06 mm2
? TO18 hermetically sealed metal housing, short cap, 1 isolated pin and 1 case pin
? 10mW/cm2 peak radiation results a current of approx. 780 nA

About the material Silicon Carbide (SiC)

SiC provides the unique property of extreme radiation hardness, near-perfect visible blindness, low dark current, high speed and low noise.These features make SiC the best available material for visible blind semiconductor UV detectors. The SiC detectors can be permanently operated at up to 170°C (338°F). The temperature coeffiient of signal(responsivity) is also low, <0.1%/K. Because of the low noise (dark current in the fA range), very low UV radiation intensities can be measured reliably. 

Options
SiC photodiodes are available with seven different active chip areas from 0.06 mm2 up to 36 mm2. Standard version is broadband UVA-UVB-UVC. Four fitered versions lead to a tighter sensitivity range. All photodiodes have a hermetically sealed metal housing (TO type), either a 5.5 mm diameter TO18 housing or a 9.2 mm TO5 housing. Further option is either a 2 pin header (1 isolated, 1 grounded) or a 3 pin header (2 isolated, 1 grounded).

◆ SG01S-18S UV Photodiode Nomenclature

 ◆ SG01S-18S UV Photodiode SpecIfication