High effiency wood shaving baling machine for sale wood shaving machine supplier

Our High effiency wood shaving baling machine can make particleboard (plywood), paper mills do the raw materials of wood pulp paper, transport companies to do flims Transport Fill, for small pigs, cattle, sheep and all kinds of animal fossa filling, can also be used as Bioenergy.

The main technical parameter of our wood shaving baling machine:

When we use the wood shaving machine, we may get in trouble sometimes, what we should do, the following informations will tell you.

(1) Wood shaving machine belt easy to bite when used, because the motor rotor and wood shredder rotor is not the same, you can move the motor left or right position, or under the motor foot pad to adjust the two concentric rotor degree.

(2) Wood shaving machine output is relatively low. Cause: The blade is not sharp or the knife is not adjusted to the proper position. Solution: Remove the knife, sharpen the blade, adjust the blade to the appropriate chip position.

(3) feeding difficult knife struggling. Reason: knife wear serious set knife gap is too large or too small. Solution: Sharpen the blade to ensure sharp blade. Adjust the knife gap 2-3mm, blade angle can not be greater than 30 °.

(4) feeding too fast machine crashes. Reason: uneven feeding speed, the blade is not sharp. Solution: Uniform feed, to ensure that no material storage crushing warehouse. Sharpen the blade to make the chip faster.

(5) Bearing fever. Reason: There is no grease in the bearing housing, the bearing housing is not installed flat, the bearing is damaged. Belt installed too tight. Solution: add grease within the bearing, bearing school balance, new bearings, adjust the belt tight, the device work properly.

If you need further information about our wood shaving machine, please contact us freely, we will do our best to cooperate with you. Our contact information is as follows:

Any problem you can contact freely,or visit website freely.

Email:Tina@machinehall.com

Phone/whatsapp:+8618539931566

skype:Tina@machinehall.com

website: