Prospecting Clockwise / Anti-clockwise R901147117 Pgh5-3x/100re11vu2 Hydraulic Gear Pump

Features:

The fixed displacement

The running noise is very low

The small vibration

The seal clearance compensation. It can make efficient operation at low speed and low viscosity

It is suitable for many different speed and viscosity.

All the installation size and nominal size of the original can be connected

You can use connections and PGF series gear pump, vane pump and axial piston pump

Contact Us:

We are an independent hydraulic company that stocks new genuine Bosch Rexroth Pump & motors. We stock Atos, Yuken, Uchida and Nachi Piston Pump. To ensure the highest-quality hydraulic pump and motor repair or remanufactured unit, We stay up-to-date with the latest diagnostic and assembly and test equipment. 

If you have any problems please contact us by emailing a675991295@163.com

Description:

Rexroth external gear pump of a gear meshing with each other, due to the gap between the top gear tooth surface hole and the shell is very small, Rexroth external gear pump gear pump cover and the gap is very small, thus separating the oil cavity and the oil cavity pressure, when the gear according to the method, from two aspects the action at the same time: 1) after meshing engagement with the right gear meshing and gradually withdraw, oil between the teeth by suction chamber to the oil pressure chamber, the suction chamber clearance increases, the formation of partial vacuum, the oil in the tank into the suction chamber in the role of the outside world under atmospheric pressure; 2) gear oil from the high pressure chamber into the suction chamber at the same time, the left side of the tooth meshing point gradually into the mesh to the oil squeezed out from between the teeth, pressure oil forced out. This is a process of Rexroth external gear pump gear oil and oil pressure, when the rotation of the gear pump gear pump is constant, constant pressure oil and oil.