Galvanized STUD TIE

1.0mm G300 Z275 Galvanised Steel
A fast effective way of securing top and bottom plates to studs. The pre-bent Stud Tie is wrapped over the wall plate and has pre-formed teeth which are hammered into both sides of the stud. Available in 300 & 400mm lengths, the longer option is suitable for double 90 x 45mm top plates.

A quick, neat and effective connector between studs and wall plates. 
built-in nails are driven into the side grain of the stud to resist wind uplift in lateral shear. This is far stronger than relying on the withdrawal strength of common nails in end grain.

Stud Ties greatly improve the jointing of top and bottom plates to studs compared to the common nail fixing.
Greater tie-down strength
No splitting of the timber
In-built nails are readily driven home with a conventional hammer, saving time and effort.
Complies with AS1684 Bracing Units rules.

A quick, neat and effective connector between studs and wall plates. 
built-in nails are driven into the side grain of the stud to resist wind uplift in lateral shear. This is far stronger than relying on the withdrawal strength of common nails in end grain.
Stud Ties greatly improve the jointing of top and bottom plates to studs compared to the common nail fixing.
Greater tie-down strength
No splitting of the timber
In-built nails are readily driven home with a conventional hammer, saving time and effort.
Complies with AS1684 Bracing Units rules.