Full UV Printing Inflatable Advertising Balloon , PVC Gaint Inflatable Colorful Helium Sky Sphere Balloon for Event

Product details:

Pictures of products :

Overlapping achievement :

Here is a good news to you is our sealed air inflatable are all overlapping and flush joint,there will be samll enternal eage in finished part,but now,we have step forward and achieved completely flush joint overlapping,no enternal eage any more,the advantage is:

1. No protruding edge,makes the inflatable looks more beautiful and perfect.
2. The capacity of withstading air presure will be much stronger,which will greatly reduce and avoid the air leaking and broken.

Certifications :

FAQ :

HOW TO INFLATE A HELIUM BALLOON

Helium will expand as temperature increases, and contracts as temperature decreases.

Decrease in temperature may cause the balloon to sag and reduce the lift capacity; increase in temperature will make balloon more taunt with the possibility of rupture. DO NOT OVERINFLATE BALLOON TO MAKE TAUT. After inflation you should be able to push your hand 3 to 4 inches into the body of the balloon.

HOW TO FLY A BALLOON

If you fly the balloon in cold temperatures during the day and the store the blimp in warmer conditions indoors at night, you must release some helium, as the warmer temperature will cause the blimps to expand. If this is not done there is a possibility or rupture or leakage.

HOW TO MAINTAIN AND STORE YOUR BALLOON

With proper care, handling, your inflatable should serve you well for an indefinite period. To clean, use warm water with mild detergent and a soft cloth. Dry it completely using another soft cloth. If the inflatable is not going to be used for several days, make sure that it’s clean and dry before storing in protective bag.

DO NOT

Fly the inflatable in wind exceeding 15 miles per hour, thunderstorms, or other severe weather conditions.

Leave the inflatable unattended.

Attach the tether lines to any place other than the harness ring.

Fly the inflatable were it might come in contact with buildings, high tension lines, or any other abject.

Do not use close to heating objects or flames.

DO

Check all lines to make certain they are tied securely

Allow adequate maneuvering area for the inflatable.