Tire airless rim die casting parts

Aluminum Tire airless rim die casting parts

Specification of Diecast parts

We can provide various of die casting parts of all industry fields upon your requests and drawings,like Telecommunication parts/telecom parts as below,

Critical parts are required more and more to be tested during the manufacturing process by more efficient and accuracy non destructive evaluation methods,such as high standard ultrasound device parts we made foe our customer.

Factory Capabilities

Working Method

1. Rapid Prototyping: 

   Customer will send the primer drawings to Sunrise to make small quantity prototypings to check whether it's suitable for assemble and the function test. Normally customer need the rapid prototyping urgently,so usually we can send the samples to customer within 7 days.  

2. DFM:design for manufacture

   Before start to make the die casting tooling, we will carefully check the drawing, and per our engineers more than 10 years strong R&D capability and rich engineering experience for aluminum die casting to analyze the drawing, and will submit the perfect DFM,we also can discuss with our customer together to solve key point that don't affect the part function and cost saving suggestions.

3. Start to Make Die Casting Tooling

   When get the customer's agreements for our DFM,such as confirm the moving die and fix die,ejector pin location,slide,parting line,machining location etc.,then we will start to make the die casting tooling,and will send the die casting tooling schedule to customer,and every week our engineer will update the schedule,then send to customer and inform that we are on the schedule. If any question will delay the schedule, we will send the current conditions to customer in advance.

4. Trial Run the die casting Tooling

   When finish the die casting tooling, we will arrange to trial run it, normally the first time we will trial run 10pcs of die casting raw material,then per the processes to follow each process,then send the samples to customer to approve it. Normally the lead time is around 2 weeks.

   If the first trial run result wasn't good, we can modify the tooling in house, we have grinding,Milling,CNC,EDM machine in house, so we can quick responds to modify,then trial run again.

   And if customer would like to ECN, it's also no problem for us,we can modify the ECN in house too.

5. FAI report and PPAP files

   When we send out the samples, we will submit the FAI report and PPAP files if customer need it.

6. Mass production

   When we get customer approval, we can start to mass production immediately.

Company Profile

1. Brief Information.

    With more than 10 years  of experience,  our 3 facilities are dedicated to offering customer aluminum complete solutions including:

    a. Prototyping

    b. Die Casting Production

    c. Machining from solid , extrusion, forging ,etc 

2. We offer One-stop Solution .

    Integrate Rapid Prototyping, Tooling, Die casting, Machining, Sand  blasting,  Tumbling, Cleaning etc. all in house and out-sourcing other surface Treatments. 

Our Advantages

1. Strong R&D capability and rich engineering experience enable us,

     a. Design Mechanical parts. 

     b. Design for Manufacturing

     c. Cost saving suggestions.

     d. PPAP capability

2. One-stop Solution

     Integrate Rapid Prototyping, tooling, Die casting, machining,

     assembling in house and surface treatments, together with

     various value-added services

What we can offer for for prototyping

Die casting tooling/Ejector pins

Our In-House Die Cast Tooling Capabiities include:

• Die casting dies.

• Die casting molds.

• Die casting inserts.

• Die cast tooling modifications.

• Die cast tooling repairs.

• Diecast tooling and trim die manufacture.