- Qinsun Instruments Co., LTD
-
Shanghai, China
- Main products: thermal resistance wet resistance meter, moisture management tester, air permeability tester, rubbing color fastness tester
Manual Friction Fastness Tester
Negotiable
/ Set
1 Set(Min. Order)
- Shanghai, China
- T/T
- 30 days
You May Like
Product Details
| Brand Name | QINSUN | Place of Origin | China |
Product Description
Introduction
Manual friction fastness tester is the most commonly used instrument for the textile industry to detect the color fastness of the fabric to dry and wet rubbing. Under certain conditions, the sample is rubbed against the standard small white cloth. Assess the degree of color transfer to the small white cloth with gray scale. The tester is equipped with crank arm, counter, stainless steel sample holder, 16mm or 25mm diameter test head (providing 9N + 10% vertical pressure).
Standards
BS 1006 D02； ISO 105 D02 X12； AATCC 8 165； GB/T 3920； NEXT TM6 M&S C8 C8A
Application
This instrument is applicable to the test of color fastness in textile, knitwear, leather, electrochemical plate and printing.
Technical Parameter
Manual friction fastness tester is the most commonly used instrument for the textile industry to detect the color fastness of the fabric to dry and wet rubbing. Under certain conditions, the sample is rubbed against the standard small white cloth. Assess the degree of color transfer to the small white cloth with gray scale. The tester is equipped with crank arm, counter, stainless steel sample holder, 16mm or 25mm diameter test head (providing 9N + 10% vertical pressure).
Standards
BS 1006 D02； ISO 105 D02 X12； AATCC 8 165； GB/T 3920； NEXT TM6 M&S C8 C8A
Application
This instrument is applicable to the test of color fastness in textile, knitwear, leather, electrochemical plate and printing.
Technical Parameter
| Max head travel: | 104mm |
| Head pressure | 9N |
| Head dimension round | 16mm |
| Counter range | 1~99999 times |
| Instrument size | 700*240*340mm |
| Weight | 15Kg |
Accessories and consumables:
1. Friction cloth clamping clip
2. Standard friction sandpaper
3. Small white friction cloth (AATCC/ISO standard)
4. Friction small white cloth (SDC)
5. Calibration fabric
6. Grey card (color) -ISO/BS standard
7. Grey card (stained) -AATCC standard
Test Procedure
1. Sample preparation:
Test Procedure
1. Sample preparation:
1. 1 The sample and standard small white friction cloth need to be moisturized in a constant temperature and humidity environment.
1. 2 When the sample has many colors, all colors should be rubbed.
1. 3 if the area of various colors is large enough,take different colored smaple separately.
1. 4 To make dry friction and wet friction, ensure that all colors are rubbed.
1. 5 If the two sides of the sample are made of different materials and colors, the test will be done on both the two sides.
1. 6 Dry and wet rubbing fastness test should not be repeatedly done in the same part of the sample.
2. Dry friction:
2. Dry friction:
2. 1 Place the sample flat on the tester with sandpaper laid on. Make the lengitudinal direction of the specimen consistent with the moving direction of the instrument and fix the sample on the pressing plate, and the sample should be flat.
2. 2 Apply the standard friction cloth to the friction head, tighten with the spring clamp, and place the friction head on the sample.
2. 3 Ensure that the sample has no slip or wrinkle when the friction starts;
2. 4 Put the friction head on the sample. Connect the POWER and press the POWER button. Set test times.
2. 5 Start the test by pressing the START button. When the test number reaches the set value, the instrument automatically stops.
2. 6 Remove the standard white friction cotton cloth and compare for rating with the gray card.
3. Wet friction:
3. Wet friction:
3. 1 Completely wet the standard friction cloth in distilled water;
3. 2 Squeeze the friction cotton in the filter paper after taking out, but contain certain water content;
3. 3 The remaining steps are the same as the above dry friction test;
4. Result processing:
4. 1 Before rating, use scotch tape to gently stick the loose fluff off the white cloth.
4. 2 Place three layers of unused friction white cloth under the white cloth to be assessed, and the color rating of the small white cloth should be evaluated by reference to the standard stained grey scale.
5. Test report:
5. 1 Report standard method
5. 2 Report dry friction and wet friction results respectively.
Contact Us
- Qinsun Instruments Co., LTD
- Contact nameQinsun Chat Now
- Phone86-21-67800179
Product Categories
| Textile | Automotive | Buliding material | Filter |
| Flammability | Other |
New Products
-
Fabric light transmittance test machine
-
Glow Wire testing Apparatus
-
AFC-133 Filter Material Test Bench
-
Glow Wire Testing Machine
-
UV Carbon Arc weather Meter
-
UV Aging Test Chamber
-
Integrated Filter Material Filtration Performance Testing System
-
Fabric water vapour permeability testing apparatus
-
Radiant Protective Performance Test Device
-
Fabric Negative-ion Concentration Tester
-
Fabric Tensile Tester
-
Fabric Ultraviolet Tester
Popular Searches
Recommended Products
- Shore Hardness Tester Test Stand AM
- AG-60 PAO Aerosol generator
- Personal Noise Dose Meter
- SOIL LOAD PENETROMETER & SOIL LOAD PENETROMETERR DB25-204DJ
- Grain Hardness Tester DB25-204G
- Fog Film Gloss Meter DB22- 2000Haze
- Side Pressure Tensimeter
- Universal Tensile Testing Machine UTTM7
- Optical Density Mete DB22-TM271D
- BELT TENSION METER DB22-280B
- Personal Noise Dose Meter DB22-600DOS
- Infrared Belt Tension Tester DB22-280H8
Find Similar Products By Category
- Instruments & Meters > Optical Lens & Instrument > Video Measuring System
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Qinsun Instruments Co., LTD
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
Qinsun
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile