ASTM A335 Grade P22 Alloy pipes

• A / N+T

• N+T / Q+T

• N+T

• Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test

• For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested.

• For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe.

• For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test.

• Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser.

• The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion.

It is the intent of Sunny Steel to furnish products of the highest quality, using the best materials and workmanship available. All personnel involved in the quality control process, whether they are the location manager, or their designee, will conduct themselves in a professional manner, with the best interests of Sunny Steel Enterprise, and the customer in mind.

The production and inspection technological process of our company is arranged according to production standards, and we also establishes professional inspection organization which takes charge of the quality inspection of all process from raw material into the company to the final product store up. Inspections including destructive testing and non-destructive testing.

5. Tensile strength tester, impact tester, hydrostatic test equipment, length measuring and weighing instruments.