Airport Fence

Airport Fence

Airport Fence is also called "Y-type grille security and defense" by the V-chip support column reinforced welded mesh, security alarm connections and hot-dip galvanized razor wire composed of defensive intensity and high level of security. In recent years, has been widely used in airports, military bases, high-security sites.

Material: high quality low carbon steel wire.

Weaving method: Preparation welded together.

Connection: The main use M card, hold the card connector.

Surface treatment: electroplating, hot dip, spray, dip.

Specifications: Using 5.0mm high-strength low carbon steel wire welded.

Mesh: 50mmX100mm, 50mmX200mm.

Mesh film with V-ribs, can greatly enhance the impact strength fence.

Column for the 60X60 rectangular steel, welded with V-shaped top of the frame. Or use 70mmX100mm of hanging connection column. Products are hot dip galvanized after using high quality polyester powder coating, using the internationally popular RAL colors

Advantages:

1 has a beautiful, practical, convenient transportation and installation characteristics.

2 terrain adaptability, and the column link with the undulating ground can be adjusted up or down;

3 in the airport fence installed four lateral bending stiffener, not much increase in the overall cost while the strength and beauty of the network increased significantly, one of the most popular at home and abroad.

Airport Fence main purposes: Airport closed, private grounds, military areas, field fence, the zone isolation network.