High Strength Steel Rebar Upsetting Machine Professional Simple Operation

High Strength Steel Rebar Upsetting Machine Professional Simple Operation?

Features:
?
1. High strength: the strength reach Grade I , stronger than the reinforcement bar
and guarantees bar break under tensile stress
(tensile strength of connection point =1.1 times of connected bar).
?
It can satisfy the requirements stipulated in the Chinese standard JGJ107-2003,JG171-2005.
?
2. Wide working range: adaptable for 16mm-32mm same diameter, different diameter, bending, new and old, advance covered up rebar of GB 1499 , BS 4449 , ASTM A615 or ASTM A706 standard.
?
3. High efficiency: upset forging and threading one joint only needs no more than one minute, and handy operation and quick link.
?
4.?Environmental protection and economy profit: no environment pollution, can work all day, not affected by weather, economize energy source and bar material.

Main Technical Parameter
?

? ? ?
Structure
?
?The machine include machine tool, press oil cylinder, forward oil cylinder, main body, mould and upset head, electrical control system, hydraulic system.

?
? ?
? ? ?
?
?
Operation
?
1- Installation

?? ? ? After the mold is installed, reset the stroke limiting bracket. Adjust the travel limit screw so that the stroke control in 15mm, insert the test steel bar to the top of the mold center hole press automation button. After the processing of the work-piece, measurement it. If failed, then adjust stroke limit screw to make the trip gradually increased, until processing of qualified products.
? ? ? ?
2-?Safety operation?rules

1. Workers have to be trained and tested OK then can work.
2. Before operation with rebar, first running the machine 2-3 mins without processing, if it is running normally the process.
3. The feeding head of head should be plain and straight.
4. Before processing the rebar, the machine should be reset and then process
to ensure the same processing.
5. The processing rebar can not have the transverse cracks, when the equipment break down should be eliminated timely.
6. Oil should be 68# hydraulic oil.
7. Workers should obey the safety rules
?

3- Machine Failure and Exclusion?