High Performance Auto Clean Filter Bearing Cooling Water For Power Plant

Automatic Backwash?Filter for Ballast Water Filtration?GFK Series

GFK series automatic self-cleaning filter is the particularly designed high performance filter by LIVIC for the ballast water filtration at typical 25 micron or 40 micron rating. The automatic self-cleaning filter can efficiently remove the suspended solids, sediment and planktons from the water. It is the key to keep the disinfection system running efficiently. The GFK series automatic self-cleaning filter meets the demanding requirement of IMO and USCG type approval performance test.

The automatic self-cleaning filter cleans and regenerates the filter screen with the most efficient and stable suction nozzle back-flushing principle. It can keep efficient self-cleaning performance and work continuously with one single filter. The back-flushing does not interrupt the water filtration process. Applied with LIVIC innovative design, GFK self-cleaning filter is universal for various water types including the raw water. It can run for a long-term without malfunction and maintenance. GFK series self-cleaning filter reaches the international first-class level in the product design standard, running performance and quality, which meets the most demanding requirement of end users.

The water flows into the screen inside from the filter inlet, gets through the screen and flows out from the outlet. The impurity particles are blocked by the screen mesh. After the accumulation of more particles, the filtration pressure drop rises to preset value (usually 50 KPa). The control system triggers the cleaning sequences. Open the back-flushing valve A and the auxiliary back-flushing pump. The gear motor drives the reciprocating scanner at the same time. The dual-channel back-flushing tube moves helically and cleans the screen inside with suction nozzles. Because the back-flushing valve A opens, the differential pressure happens in the postion where group A nozzles contact the screen. The differential pressure = outlet pressure - back-flushing outlet A pressure. The outside filtrate reverse flow passes the screen and injects into the group A suction nozzle inside. The impurities and particles on the inner surface are flushed out by the reverse flow and the filter screen filtration capacity is regenerated. After all the screen area is scanned and cleaned by the suction nozzles, one back-flushing cycle is completed. During back-flushing, the filtration goes on and Only very low fluctuation of flow rate and outlet pressure happens.

Start the large particle back-flushing function by time mode after running for a period. Keep back-flushing valve A closed and open back-flushing valve B. The gear motor drives the group B suction nozzles to back-flush out the large particles that cannot be removed by the group A suction nozzles, which will avoid the malfunction resulting from accumulated large particles for a long time.

Specifications:

Contact Us

Shanghai LIVIC Filtration System Co., Ltd.

Contact nameMiss. Lyla Tan

Chat Now

Phone86-21-68173577

AddressNo.8, Hehua Rd., Pudong New District, Dezhou, Shandong

• *Email
  Please enter Your valid email address.
• *To

  

  Miss. Lyla Tan
• *Message
  Your inquiry content must be between 20 to 5000 characters.
•  

  Please enter a correct verification code.

Send Now