Embedded LED Underwater Lights With Optional Lens Meet Diversified Lighting Color Change

Embedded LED Underwater Lights With Optional Lens Meet Diversified Lighting Color Change

Technical Datas

Dimension

AL-4CR01----Recessed Model

AL-4CS01----Spotlight Model

Material & Manufacturing Technique

Housing:Molding shaped stainless steel sus316#.

Gasket:EPDM gasket

Glass:Tempered glass,T=7mm

Lens:Optional lens,efficiency ≥ 85%

Cable gland:IP68 PG-9 copper with nickel-coated.

Seal:Molding shaped silicone seal under the front cover

? ? ? ? Silicone gule among the LED,lens and PCB.

LED:High power LED

PCB:Excellent heat conductivity aluminum,coefficient of heat conductivity≥2.0w/mk

Driver:Constant current output

? ? ? ? ? ?Single color LED=2-circuit output

? ? ? ? ? ?RGB 3in1 LED=3-circuit output

Applicaation environment:Temperature of water between -20℃-40℃ less than 1m depth

Power cable:H07RN-F 2x1.0m2 L=2m(for single color)

? ? ? ? ? ? ? ? ? ? ? H07RN-F 4x0.75m2 L=2m(for RGB)

Sleeve:061 PVC

Model Number Infos

Graphical Representation?

Warm Tip & Warning?

1) The 316 Stainless Steel 1W 3W LED Underwater Light With Recessed Sleeve And Round Base?has to

? ? ?be lighted underwater to prevent the lamp from burnning up because of over-heat.

? ? ?Pls don't light it more than 15 minutes out of water!

2) The LED underwater light is 12V / 24V low voltage,pls don't connect it to 220V / 240V high voltage,this?

? ? will burn the LED underwater light.

3) The best height for this LED underwater light lighting is within 1M.

4) The power cable of this LED underwater light can be?customized.

5) This LED underwater light has very lighting effect for fountain lighting project.

Photo Show

Application Scene