Small Sitting type thermoplastic road marking machine

TT-XRZ-I  (Small Sitting type thermoplastic road marking machine )

Small Thermoplastic Convex Road Marking Machine:
1. Engine : The 18Hp water-cooled electric startup diesel engine with four-cylinder inline, low noise and environmental protection has water temperature,voltage and engine oil indication, whose max rotating speed is 3000r/min. The
fuel tank's cubage: 50L
2. Driving system: The original imported variable speed transmission system with automatic brake device, which can be freely operated in forward, back off or stop(HTS)
3. Driving speed:Forward: 0-22km/h; Back off: 0-12km/h; Max climbing capacity: 15°
4. Heating ways: Heating  transfer oil ensures the heating safer and friendlier to the environment.
5. Glass beads dispensing system: Synchronous with the paint screeding system, ensures the dispensing evener and more economical.
6. Marking bucket: Equip with scraped marking bucket controlled by hydraulic pressure. The structure board adopts imported high temperature resistance(2000) and oxidation resistance hold size special steel sheet, which have more stability after being punched. The plinth is made of special alloy steel   and applies the pneumatic scraped structure. The floor knife adopts imported hard tungsten steel knife-head. The exact craftwork ensures better sensibility, abrasion proof and firmness,  more regular convex shape, evener bottom line edge, and perfecter head. The configuration standard of ucket is 150mm.(Option for other size according to the needs of customer)
7. Electronic control: Set various marking standard control , which enables the micro-electronics intelligent control. Freely adjust the types of marking according to the needs of customer individual.
8. Chassis: Firm welding frame, four wheel structure, as well as the gas-filled proof pressure wheels, and the diameter is:500. There is a seat on the left side or right side for the operator, and the driver can freely control the directions by the hydraulic driving steering-wheels; Equip with stable brake system which makes the running safer.
9. Paint tank: The tank is made of cold-rolling oxidation resistant steel, which keeps warm by heating  transfer oil. The heating temperature can be freely controlled according to the different kinds of coating chosen by the owners, and equips with erect type hand stirrer device, The cubage of tank: 450kg.
10. Guide rod: The telescopic guide rod can be freely adjusted to up, down, left and right.
11. Alarming function: Equip with adjustable alarming lamp with flicker frequency ,which improves the safety of road marking construction (Option for the electronic direction warning arrow on the back of the machine ,which can
be freely adjusted the arrow direction.)
12. Transportation:Option for tilt-trailer (type:TT-TGC)device, easy for long distance transportation.
13. Shape size. The whole machine weight: 2380mm (length)*740mm (width)*1650mm( height). 585kg(not including the gas tank, with a 150mm bucket).