TT-ST200-I (Hand-push Cold Plastic Road Marking Machine)

Product Name: TT-ST200-I Hand-push Cold Plastic Road Marking Machine:

Detailed Description of TT-ST200-I Hand-push Cold Plastic Road Marking Machine:

1. Engine of TT-ST200-I Hand-push Cold Plastic Road Marking Machine: Original imported Japanese Honda or Robin 13HP four-stroke air-
cooled gasoline engine.
2.Chassis of TT-ST200-I Hand-push Cold Plastic Road Marking Machine:Firm welding frame ,whose surface has been settled by chrome-
plated, zinc-plated or painting treatment ,fix with high speed imported 
bearing ,to make the whole machine more lightness.
3. Rubber wheel :Left and right back tyres are all gas filled vacuum 
wheel ,diameter 350mm .Front guide tyre is special abrasion resistance 
modified rubber tyre with the diameter 190mm.
4 .Front tyre guide arm:  Lock the front wheel direction device ,which  makes 
sure the marking machine walking in straight line or turning freely.
5.Guide rod :Up, down ,left ,right freely adjustable .
6.Paint pump: Double New wheel hydraulic piston high pressure airless pumps 
run stably, which are suitable for cold plastic road marking paint .Big flow,
stable  pressure. Max pressure 20mpa(working pressure 10-15mpa),single pump 
max flow 9L/min.It can spray two colors marking, double-actual line, zebra 
strpes and airport double-color line synchronously.
7.Paint tank (optional):The capacity is 80Kg.Fix with sieve inside ,and with 
filter at feeding port fix .
8.Spray gun :Equip with three new type manual spray guns ,fix with hard side
columnar reverse wastewater nozzles(20/25 or 30/25), to make the site 
discharge fast and easy .Non-arc nozzle makes the line straight .Hand brake 
controller makes the change among single, double or three flexible discharging.
9 .Spray width :100-450mm.
10 .Size . Weight :1500 mm(length)x 760 mm(width)x 1040 mm(height)x 142kg
(not including of coating tank ).
Optional for operator sitting chair XT-II to realize self-propelled .
Optional for air-compressor, glass beads pressurized storage, glass beads 
spray gun ,glass beads spray control system and stainless spray system to meet 
the needs of water paint construction.
C type equips with a micro-electric control system, which consists of Micro-
electric controller, on-off coder ,electromagnet, special gun bracket and so 
on. This system can be set four kinds of marking way according to the national 
road marking standard ,and realized fully automatic