Energy Saving Hot Airflow Wood Sawdust Flash Dryer Machine 400 - 500 kg / H

Energy Saving Hot Airflow Type Wood Sawdust Flash Dryer Machine 400 - 500 kg / H

Introduction of wood sawdust flash dryer machine?
?
1) Raw materials should be sawdust, suitable for drying the moisture 20-50% final moisture 8-12% .
2) Diameter of raw materials: 3-5mm.?
3) Temperature of Hot Air: 180-250 °.?
4) Working principle: The stoves (boilers) generate hot air, then through the fan to dry the materials.
5) This wood dryer reduces the moisture to 8-12% with the advantages of lower cost consumption and high efficiency.
6) The wood sawdust flash dryer machine is equipped one fuel boiler, inlet, steel pipe, exhaust blower (fan), cyclone. Wet materials are input into the hopper. The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly. And then hot air is flowing and going though the curving?pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are expelled out by the exhaust blower (fan).

Advantage of wood sawdust flash dryer machine

1) Raw material is processed by cutting, shearing, blowing, floating and rotating, then become granulated shape and separated greatly, the relative velocity between solid phase and gas phase is great, this strengthens the process of heating exchange. Therefore , this machine has strong drying capacity.
2) This machine combines the whirl technology with the fluidity. ejection and smashing step technologies, can be used for a wide range.
3) Drying hot air enters into the bottom of machine and formed strong rotating airflow, it can wash out material sticking on inside surface .
4) In high temperature area at bottom of equipment, heat sensitive raw material will not directly contact with heating surface. As a result, carbonization and color change problems can be solved.
5) A segmented ring and a rotational flow piece are equipped in the upper drying room in order to control granulated size and finished products wet containing rate.
?
Working principle of wood sawdust flash dryer machine

Wood sawdust flash dryer machine, adopting double drum, double pipe connection, it can dry the saw dust, rice husk, peanut shell and straw all at once. Dryer uses the homemade?combustible gas as heating source, drum part and coiled pipe as the drying part. Drum part has two layers: inner drum and outer insulation. Inner drum has three head inner helix slice which can move the drying aggregate in constant speed, we call it stir-frying heating. Coiled pipe secondarily uses the heating source, using draught fan negative pressure to pump the drying aggregate to screw device, then separating and drying.

Technical?parameters?of wood sawdust dryer machine