Digital USB Laser Control Board / Controller For Co2 / YAG Laser Maker

FEATURE

14?general?output?signals(TTL?compatible):?Out0-7?coming?out?of?Con5.?Out813?coming?out?of??CON2.

Out0?-?3?,out8?and?out13?are?TTL?outputs.?Out4-7?can?be?configured?as?OC?output?or?TTL?output?by?

jumpers.?Out?9-12?are?OC?outputs.

ReMark(Repeat?marking?signal):?in?the?case?of?high?speed?marking?of?a?same?pattern,?a?foot?pedal?can?

be?connected?to?this?pin.?If?some?variables?are?in?the?pattern?or?the?pattern?is?too?big?for?the?cache?in?

board,?the?foot?pedal?can?be?only?connect?to?general?input?pins.

Laser?signal:?we?provide?both?high?level?effective?and?low?level?effective?signals.

PWM?signal:?both?differential?and?TTL?signal?is?provided.

A?specified?red?light?pointer?signal?is?now?added.

Two?analog?signal?that?control?power/frequency?is?now?added.

Using?USB2.0?specifications.

CARD?PARAMETER

16?general?input?signals(TTL?compatible)

14?general?output?signals(TTL?compatible)

Using?USB2.0?specifications

Laser?Safety

This?product?is?intended?for?controlling?a?laser?scan?system.?Therefore?all?relevant?laser?safety?directives?

must?be?known?and?applied?before?installation?and?operation.?The?customer?is?solely?responsible?for

?ensuring?the?laser?safety?of?the?entire?system.

All?applicable?laser?safety?directives?must?be?adhered?to.?Safety?regulation?may?differ?from?country?to

country.?It?is?the?responsibility?of?the?customer?to?comply?with?all?local?regulations.

Please?observe?all?laser?safety?instructions?as?described?in?you?scan?head?or?scan?module?manual,

and?this?manual.

Always?turn?on?the?power?of?this?product?and?the?power?supply?for?the?scan?head?first?before?turning?

on?the?laser.?Otherwise?there?is?the?danger?of?uncontrolled?deflection?of?the?laser?beam.

We?recommend?the?use?of?a?shutter?to?prevent?uncontrolled?emission?of?laser?radiation.

ACCESSORIES

DB9?male/female?sockets

USB?cable?(1.5m)

DB15?male/female?sockets

DB25?cable?(1.5m)

DB25?male/female?sockets

CD