Highway Guardrail Forming machine

Composing of Equipment:

1,Decoiler                                           1set
2,Leveler with 9 group rolls                   1set
3,315T Hydraulic Pressure Machine      1set
4,Punching & Cutting Mould                 1set
5,Cutting-to-length                               1set
6,Feeder                                             1set
7,Forming Machine                              1set
8,Style 31085 of Forming Mould            1set
9,Vertical roll rack                                4sets

Mass technique parameter of Production Line:

1,Capacity of equipment: about 76.9kw
2,Speed of manufacture:10000-15000mm/min, Or 2-3pcs/min(4320/piece)
3,Thickness of product: 3mm
4,Highness of product:100mm
5,Width of Steel Material: 500mm
6,Diameter of Roll:80mm

Mass technique Parameter of part equipment:

1,Decoiler
Style: Decoiler with two tapering shape.
Load:4T, 
Power:.2.2kw
Width of producing Material: 480mm
Max Capacity of Decoiler: 4000T
Coil Inner Diameter: 460-510mm
Coil Outer Diameter: 1200mm
2,Leveler
Style: First & postpositioned guidance
Total: 9 sets of roller: 4 sets of roller for delivering, 5 sets of roller for leveling
Power:5.5kw
Main device Material of Leveling Rollers: 40Cr/HRC48-52
Diameter of shaft: 118mm
Thickness of leveled plank:2-4mm
Width of leveled plank:300-520mm
The machine uses the ZQ350 speed reducer
3,315T Hydraulic Pressure Machine.(Standard Style)
Power:22kw
  Hydraulic Pressure Machine is from famous suppliers in China.
4,Clamp feeding equipment with two sets clamp parts.
Power:2.2kw
5,Forming machine
Style of Machine:GY180
Group of Forming: 12 groups
Power of Forming Motor: 45kw
Style of retarder: ZQ650
Transmission way :Every rack has one gear power distribution box. Compared with chain drive and gear drive ,it has long life high speed and lower noise.
Material of roller: 40Cr.
Material of Forming Mould:GCr15, Quenching Disposing HRC56-62.
6,Installation Dimension(L*W*H):33000mm*3500mm*5000mm