Professional Industrial Dust Collection Equipment for Grinding or Powder

Professional Industrial Dust Collection Equipment for Grinding or Powder

Industrial dust collection equipment ?grinding / milling / sawing / sanding / polishing .

We?customize desgin and produce??for?different gas?working condition and different type of gas pollutions .Here , introduce our ?sigle baghouse dust collector for general dust source in process of polishing , sanding , grinding , milling , sawing , etc . The air flow is usually from?3000 M3/ h to 60000 M3/h.

Brief Introduction :

ECOGRACE pulse jet dust collector Filter Unit is generally with smaller air flow from 2000 M3/H to 60000 M3/H , which is small in outside dimention , and we will design the most reasonable dimention for easy container loading and shipping , no need more installatino work at production site . It will be assembled in whole and put into the container , you can directly start when take out from container .

Dust Collector??technical specification :

Working Principle of ?dust collection systems??:

1. The compostion of small dust collector unit??:

Assmebled Filter Unit , ?Fan , PLC , air compressor . Rotary dust discharging.

2. The filter ?cleaned ?by solenoid valve pulse. ?ASCO and GOYEN is the regular band we take .

3. Filter cage ?and filter bag will be fit in the assembled baghouse .?

4. Good and reasonable design for the hoods and capacity of dust collector will reach a very different working result for the steel plant induction furnace .?

Advantage of ECOGRACE dust collector Filter Unit :

1. Easy operation maintenance.

2. Assembled when EX work from our factory and no more ?intallation work needed.

3. High filtration efficiency up to 99.99% , low ?emission < 30 mg/ M3.

4. Energy saving?

5. Lower system resistance up to < 1000 pa.

6. ECOGRACE self made fabric filter bags will be with free replacement in?3 years.?

ECOGRACE project show :

Production and shipping??: