Silver Waterproofing Roof Flashing Tape / Bitumen Flash Band with Butyl Rubber Adhesive

50mm x 10m Flashing tape aluminium foil coated with bituminous adhesive

Alu Flashing Tapes

Description:

ALUMINUM FOIL TAPE, FLASHING TAPE, PEEL/STICK ROOF TAPE, Alu bitumen tape, Alu waterproof tape, sealing tape has a heavy aluminum facing together with an extra thick rubberized asphalt based adhesive system.

Aluminum flashing tape?is recommended for most types of roofs, windows and flashing problems including:

Aluminum flashing tape----Structure:

The specification of the tape consists of three layers,

Adhesive: Fexible modified bitumen adhesive compound.

Film backing: Aluminium foil

Interleaf: Antiadhesive Film Treated with Silicone

Aluminum flashing tape----Features:

Aluminum Flashing tape----Application:

The surfaces to be sealed must be clean, dry and free of loose rust, scale, dust, talc and dirt. All oil, grease, silicone or other contaminates should be first removed with a suitable solvent/cleaner.

For older roofs use a stiff brush to remove all loose granules and surface elements.

Porous surfaces should be primed with a common asphalt based primer and allowed to dry before Xunda-T 700 is applied.

Install Xunda-T 700 by gradually peeling away the plastic release liner while rubbing the Xunda-T 700 to the surface.

Hint: prevent bubbles under the product by using your hand to squeegee out air by wiping your hand towards the roll as you set the tape to the surface.

Overlap seams or sealing are of application by 3 inches.

Also 2.5?m,3.0?m,?5.0?m,1?0m,20?m?length?is availbale