Custom CNC Shearing Machine , Steel Sheet Shearing Machine 40 mm Thickness

Hydraulic Guillotine steel sheet shearing machine

Specification

Configuration

Description

1.The machine is suitable for general machinery,automobiles,container manufacturing, electrical switches and light industry,can be used for a variety of metal materials(tensile strength σb material≤ 450N/mm2) straight cut,a corresponding decrease in the thickness of the shear after changing the blade material can be cut high tensile strength low-alloy steel plate, stainless steel,spring steel.

2.Using the three-rail oblique edge structure,namely a knife to constrain cross-section through three fulcrum,while the former is the elastic fulcrum through before spring preload,excluding the gap between each motion pair,while the knife parallel processing error frame rail surface can be compensated,thus ensuring the stability of the blade gap,three wheel and the fulcrum is adjustable eccentric pivot through eccentric adjustment under the knife around the fulcrum,leveraged,blade gap is changed so as to achieve the purpose blade gap adjustment.As the eccentric adjusting drive motor on the outside of the machine column easy to adjust,so that the blade gap adjustment therefore becomes very easy and fast.

3.Hydraulic cylinders in the form of two-series body.Due to changes in shear cuts from left to right, so the load also changes the fuel tank can be effectively used in series to with stand these loads change to prevent changing the sh