Custom Plastic Body PU Polyurethane Foam Gun For Construction

?TF-010 cheap plastic body pu foam gun for construction ?

Quick Detail :

1, Gun body material: Plastic

2, Adapter coated: Plastic

3, Trigger: Plastic

4, Gun barrel: Steel

5, Needle: Stainless

6, OEM: Allowed

Description :

After?use?of?the?Foam GUN?:

1.?Leave?gun?filled?with?foam?after?use.?Always?keep?a?filled?can?of foam on?the?gun.??

2.?Tighten?the?flow?adjustment?screw?completely.?Do?not?empty?the?gun.?Gun?must?always?be?filled?with?

foam;?otherwise?foam?is?cured?by?humidity?in?the?air.??

3.?Store?can?straight?up?(gun?on?top?of?can).?

Use?foam gun again?:?

1.?Shake?the?can?vigorously?(keep?hold?of?the?gun).??

2.?Remove?cured?foam?at?the?tip?of?the?nozzle?carefully?with?a?small,?sharp?knife.??

3.?Release?the?flow?adjustment?screw?lightly?and?dispense?foam?immediately?until?the?flow?of?foam?is??

correct.??

4.?The?gun?is?now?ready?for?use.??

5.?Foam?output?can?be?controlled?with?trigger?of?the?gun.??

Replacing?of?the?can?foam:?

1.?Check?if?can?is?empty?by?dispensing?foam?in?a?dust-bin?until?no?more?foam?is?released.??

2.?Take?a?new?can?of?foam.?Shake?vigorously.??

3.?Unscrew?the?empty?can?(keep?valve?opening?away?from?you),?remove?released?foam?from?adapter?and?

replace?the?empty?can?immediately?by?a?new?one?without?using?Cleaner.??

4.?Dispense?foam?immediately?to?fill?the?extension?tube.??

Cleaning?of?the?foam gun at?times?of?interruption?:?

1.?Unscrew?the?can?of?foam (keep?valve?opening?away?from?you).??

2.?Take?a?can?of?FOAM GUN CLEANER?and?screw?the?can?on?to?the?gun.??

3.?Pull?the?trigger?to?fill?the?gun?with?cleaner.??

4.?Cleaner?has?to?remain?in?the?gun?for?about?15?minutes.??

5.?Pull?the?trigger?again?to?refill?the?gun?with?cleaner.??

6.?Unscrew?the?can?foam gun cleaner.??

7.?Wipe?superfluous?cleaner?from?adapter?with?a?tissue.?Spray?adapter?with?Vaseline?Spray?to?grease?the?screw-thread.??

8.?Screw?the?can?foam on?the?gun.??

9.?Pull?trigger?of?the?gun?again?until?foam?is?released?and?cleaner?completely?removed.??

10.????The?gun?is?now?ready?again?for?use.

Applications:

1. Take a can of foam and shake vigorously.??

2. Screw can onto adapter of foam gun (not too tight).?

3. Release the flow adjustment screw lightly and dispense foam immediately to fill the entire gun with foam.?

4. The foam gun is now ready for use.?

5. Foam output can be controlled with flow adjustment screw.

Specifications:

Competitive Advantage:

FAQ:

1.Q: Are you a factory or trading company??

A: We are a factory.

2.Q: Where is your factory located? How can I visit there??
A: Our factory is located in Hangzhou City, Zhejiang Province, China, Which has developed transportation. ?Welcome to our factory.

3.Q: Do you accept OEM?

A:Yes,we have 8 years experience of OEM.

4.Q: How can I get some samples??
A: We are honored to offer you samples.

5.Q:?How?do I know?the?products’?quality?and?the?packing?ways?are?the?ones which we?required?

A:?Each?product?will?be?tested?before?sending?out,We will check with our customer about??every product details.